Unit 8 Flashcards
Why is not practical to sterilize mineral resources because of noise
Minerals are a limited and location specific and Noise limits must not unnecessarily sterilize such resources.
- There is a limit to what can be done to reduce the noise outdoor plant while still practicable to operate the site.
Why are minerals works more tolerable?
Compared with noise from a continuously operating industrial plant, local residents may be more tolerant of occasional noisy episodes from open site working.
- minerals sites have a finite lifetime, whereas anindustrial site may be a relatively permanent fixture.
- cost of full noise control is more acceptable in an industrial installation,
Minerla noise guidance
The initial policy guide Mineral Planning Guidance Note 11 (MPG11) was superseded by Minerals Policy Statement 2 (MPS2) in 200585,
The UK government has replaced MPS2 with the Planning Practice Guidance web basedresource to the NPPF86
What does mineral noise guidance suggest for survey and mitigation?
guidance suggests that development proposals should undertake a noise emissions assessment, The proposals for the control or mitigation of noise emissions should:
- consider the main characteristics of the production process and its environs, including the location ofnoise-sensitive properties and sensitive environmental sites
- assess the existing acoustic environment around the site of the proposed operations, includingbackground noise levels at nearby noise-sensitive properties
- estimate the likely future noise from the development and its impact on the neighbourhood of theproposed operations
- identify proposals to minimise, mitigate or remove noise emissions at source; and
- monitor the resulting noise to check compliance with any proposed or imposed conditions.
Minerla planning noise criteria
The guidance sets out noise level criteria to be achieved by mineral extraction operations and these are detailed as follows:
-
noise limit at the noise-sensitive property that should not exceed the background noise level (πΏπ΄90,1β) bymore than 10 dB(A) during normal working hours (0700-1900).
- In any event, the total noise from the operations should not exceed 55 dB(A) πΏπ΄ππ,1β (free field) especially if first part cant be obtained
- For operations during the evening (1900-2200) the noise limits should not exceed the background noise level (πΏπ΄90,1β) by more than 10 dB(A) and should not exceed 55 dB(A) πΏπ΄ππ,1β (free-field).
- For any operations during the period 22.00 β 07.00 noise limit should not exceed 42 dB(A) πΏπ΄ππ,1β (free field) at a noise sensitive property.
-
Increased temporary daytime noise limits of up to 70 dB(A) πΏπ΄ππ,1β (free field) for eight weeksin a year for bund construction where it brings longer-term environmental benefit
- If longer a lower limit should be considered
Main sources of noise form surface mining
The main sources of noise likely to arise on a surface minerals site include:
plant and machinery with diesel-engines
loading/unloading of dump trucks, lorries, hoppers plus associated machinery, conveyors, etc.
rock drilling and blasting in hard rock quarries
process plant which can include mechanical screening plant and rock crushing plant
What are the owners/applicants required to do
The owners/applicants are required to
use best available techniques (BAT) to minimize, mitigate or remove noise emissions at source.
assess the existing noise climate,
estimate the likely noise from the development using a prediction scheme, and
monitor the noise emissions after the development.
ideal protocols to follow ot limit noise impact from mineral extraction
If possible, the following should be followed
- electrically powered plant should be used in place of diesel-powered plant.
- Bunds should be placed around the workings, particularly on the sides closest to noise- sensitive buildings.
- The site layout should be designed so that the site starts at a distance from noise-sensitive buildings and works towards them
- Process plant should be placed within buildings and positioned in sheltered locations
- Material should not be dropped unnecessarily into truck and hoppers to be lined with impact-reducing material.
- Equipment should be well-maintained to avoid unnecessary noise
- Access points should be arranged to avoid noise sensitive buildings and to reduce traffic throughvillages, etc.
why can Monitoring mineral extracion cause issues with accuracy
Monitoring can cause issues with accuracy
Hard to access site boundary
Bunds on boundary cuasing lower levels at measurement position
Working area moves around for large sites meaning big changes in level at monitor position
Best to monitor at NSR to avoid these problems
Where do Waste disposal recycling operations that form an integral part of a mineral working operation fall within
and what are operators advised to take account of
Waste disposal and recycling operations that form an integral part of a mineral working operation fall within the scope of MPS2 Annex 2.
Waste management operators/waste planning authorities are advised to take account of MPS2 Annex 2Annex alongside Planning Policy Guidance Note 10 (PPG10) noise conditions.
What do licensed conditions do on Landfill, Waste Management and Recycling Operations.
Licence conditions indirectly control the amount of noise generated as will any prescribed screening requirements. These can be on
- on amount of waste,
- frequency of deliveries
- hours of operation
- When application for a waste disposal licence is made, local planning authorities should consider specific noisecontrol conditions to protect local amenity.
What does BS 5228 part 1 and 2 cover?
Parts 1 and 2 of BS 5228 (2009+A1:2014) Noise and Vibration Control on Construction and Open Sites
Part 1 β Noise;
Part 2 β Vibration
Contains information about
permissible noise and vibration levels and their units
methods for the prediction of noise and vibration levels
BS5228 Part 1 β Noise summary
πΏπ΄ππ in dB is used for setting noise limits.
states that higher levels of noise from construction compared to existing levels might be tolerated compared to industrial sources as the works are of short and limited duration.
Wilson committee based approach
Wilson commite refers to fixed limits on A-weighted sound levels βoutside the nearest window of the occupiedroom closest to the site boundaryβ of 70 dB in rural areas and 75 dB in urban areas.
Part 1 of BS5228 extends and modifies these limits
trigger levels for determining the eligibility for sound insulation (or temporary rehousing if limits are exceeded by10 dB or more).
ABC Method
For dwellings
the construction noise levels are compared with ambient noise levels
Categories A, B and C, apply where ambient levels are below, the same or above the proposed thresholds respectively.
- If the ambient level is less than or equal to the threshold, the total noise level has to exceed the appropriate threshold by 3 dB.
- If the ambient level is greater than the threshold, the total noise level must exceed the ambient by 3 dB for a significant effect.
