Transmission service - part B Flashcards
what should be done before installing the transmission back into the vehicle
bench test the shift system
before tightening any fasteners you should always make sure the transmission is
fully seated and never pull the transmission into position with the fasteners
in order to check for air leaks make sure the chassis air supply is at least
90 psi
when working on hybrid systems what should be done
set up a buffer zone around the transmission so only certified high voltage technicians can enter
what is the recommended buffer zone distance
1 meter
what medium of stored energy in contained within an accumulator
fluid and gas
what is the minimum length of time permitted to allow the fluid in the accumulator to drain back to the reservoir
5 min