TLE EXAM

Question 1

THESE TOOLS ARE MADE OF STEEL AND TAMPERED AT THE TIP USED TO LOOSEN OR TIGHTEN SCREWS WITH SLOTTED HEADS. THEY COME IN DIFFERENT/VARIOUS SIZES AND SHAPES

Answer 1

SCREWDRIVERS

Question 2

[TYPES OF SCREWDRIVERS]
THE BLADE TIP IS WEDGE-SHAPED AND RESEMBLES A NGATIVE [-] SIGN. THIS IS USED TO DRIVE SCREWS WITH A SINGLE SLOT HEAD

Answer 2

STANDARD/FLAT SCREWDRIVERS

Question 3

ARE AVAILABLE WITH BOTH INSULATED AND UNINSULATED HANDLES, WHICH ARE USED IN HANDLING AND TWISTING WIRES.

Answer 3

PLIERS

Question 4

COME IN VARIOUS SIZES AND SHAPES. THEY ARE USED TO DRIVE AND PULL OUT SCREWS. THEY ARE MADE OF INSULATED HANDLES WITH EITHER SHARP AND SQUARE TIPS.

Answer 4

SCREW DRIVERS

Question 5

IS USED TO PULL WIRE INTO THE CONDUIT OR RACEWAY

Answer 5

WIRE PULLER [FISH WIRE]

Question 6

IS A TOOLS USED TO BEND RIGID METAL CONDUIT

Answer 6

CONDUIT BENDER

Question 7

IS NEEDED TO MAKE HOLES IN BUILDING STRUCTURE FOR PASSAGE OF WIRES AND CONDUIT IN BOTH NEW AND OLD INSTALLATION, INDOOR OR OUTDOOR WIRING.

Answer 7

DRILLING EQUIPMENT

Question 8

USED TO DRIVE AND PULL OUT NAILS. THEY ARE EITHER MADE OUT OF STEELS OR PLATICS

Answer 8

HAMMERS

Question 9

THE ELECTRICIAN USES THE FOLLOWING MEASURING TOOLS TO MEASURE VALUE OF VOLTAGE, CURRENT AND RESISTANCE, WIRE LENGTH, OPENING SIZES OF WIRE, CONDUIT AND OTHER ITEMS

Answer 9

MEASURING TOOLS AND INTRUMENTS

Question 10

TWO TYPES OF SAWING AND CUTTING TOOL

Answer 10

HACK SAW AND KEYHOLE SAW

Question 11

ARE THOSE ELECTRICAL CONDUCTORS WITH 8 MM AMERICA WIRE GAUGE [AWG] SIZE NO. 8 OR CAN BE SMALLER

Answer 11

WIRES AND CABLES

Question 12

ARE USED IN MAKING SPLICES AND TAPS CONNECTIONS OF WIRES

Answer 12

SOLDERING TOOLS

Question 13

PROPER STORAGES OF TOOLS ENSURES THEIR DURABILITY AND EFFICIENCY. THEY MUST BE STORED IN DRY PLACES. CORRECT LABELLING OF CABINETS AND TOOL RACKS IN ACCESSIBLE LOCATIONS FOR LABORATORY ACTIVITY IN THE SHOP IS ALSO IMPORTANT

Answer 13

TOOL STORAGE

Question 14

TOOLS UNDER THIS CLASSIFICATIONS ARE PLIERS, SAW AND CHISEL. PLIERS ARE AVAILABLE WITH BOTH INSULATED AND UNINSULATED HANDLE PRIMARILY INTENDED FOR CUTTING, TWISTING AND SKINNING WIRES OR ELECTRICAL CONDUCTORS

Answer 14

CUTTING TOOLS

Question 15

HAMMERS AND SCREWDRIVERS ARE UNDER THIS CLASSIFICATION. HAMMERS ARE MANUFACTURED WITH EITHER SOFT FACED OR HARD FACED.

Answer 15

DRIVING TOOLS

Question 16

—— IS NEEDED TO MAKE HOLES IN BUILDING STRUCTURE FOR THE PASSAGE OF CONDUIT WIRES IN BOTH NEW AND OLD CONSTRUCTIONS

Answer 16

DRILLING EQUIPMENT

Question 17

IT IS USED IN JOINING ELECTRICAL WIRING, SPLICES, AND TAPS CONNECTION.

Answer 17

SOLDERING EQUIPMENT

Question 18

THE EXTENSION RULE, METRIC RULE, WIRE GAUGE AND CALIPER ARE THE COMMON TOOLS UNDER THIS CLASSIFICATION

Answer 18

MEASURING TOOLS

Question 19

AN EQUIPMENT USED WITH A PRESSURE FLUID OIL TO ACCOMPLISH WORK

Answer 19

HYDRULICS

Question 20

TOOLS THAT CAN BE EASILY MOVED FROM ONE PLACE TO ANOTHER IN NORMAL USE

Answer 20

PORTABLE TOOLS/ EQUIPMENT

Question 21

IT IS DONE TO PRODUCE A DESIRED BEND ANGLE ON CONDUIT FOR INSTALLATION.

Answer 21

BENDING TOOLS

Question 22

THE TOOLS UNDER THIS KIND ARE MULTI-TESTER, INSULATION TESTER AND CLAMP METER.

Answer 22

MEASURING AND TESTING TOOLS