Timber

Question 1

A timber stud wall is fixed vertically between what two things?

Answer 1

A timber stud wall is fixed vertically between what two things?

Question 2

In a timber stud wall the vertical timbers are usual fixed at what two centres?

Answer 2

1. 400mm or

2. 600mm

Question 3

In a timber stud wall, what is used to stiffen the studs against movement that could cause finishes to crack?

Answer 3

Noggins

Question 4

What is often applied to both sides of am insulated timber stud panel to provide lateral stability?

Answer 4

Plywood Sheathing

Question 5

What is the purpose of breather paper?

Answer 5

To act as a barrier to water and at the same time allow the release of moisture vapour under pressure to move through the sheet.

Question 6

Plywood sheathing is used to brace the stud wall in what direction?

Answer 6

Diagonally

Question 7

The sole plate of the lower stud frame bears on what?

Answer 7

The foundation

Question 8

The head of a timber frame supports what?

Answer 8

The floor joists

Question 9

As a barrier to warm moist air what should be fixed on the warm side of the insulation?

Answer 9

A Vapour Control Layer