Tell Me - Other Flashcards
Tell me how you would check that the brakes are working before starting a journey.
- Drive forward slowly
- Press the foot brake
- It should not feel spongy or slack
- The car should not pull to one side
Tell me where you would find the right information for the recommended tyre pressures for this car.
In the car manual or you can ask at a garage.
Tell me how tyre pressures should be checked.
With an air pressure gauge. Refit the valve caps afterwards.
Tell me how you make sure your head restraint is correctly adjusted.
The middle of the headrest should be in line with the top of your ears and as close to the back of your head as comfortable. To adjust you would use the button and move up or down.
Tell me how you would check the tyres to ensure that they have sufficient tread depth and that they are safe to use on the road.
With a tread depth gauge. The tread depth should be no less than 1.6mm across the central 3/4 breadth of the tyre. There also should not be any cuts or bulges on the outside.
Tell me how you would check that the headlights and tail lights are working.
- Turn ignition on
- Turn the circle in the centre of the car once to the left to the dipped headlights
- Get out an check they are working
Tell me how you would know if there was a problem with you anti-lock braking system.
An ABS warning light would come on
Tell me how you would check that the indicators are working.
- Press hazard warning button.
2. Walk around the car to check all 6 indicators are working.
Tell me how you would check the brake lights are working on this car.
You would press the foot brake and see reflections in windows or ask someone to help.
Tell me how you would check the power-assisted steering is working before starting a journey.
Give steering a bit of pressure as you start the engine. When you move off you will feel that the steering is light to turn and not heavy.
Tell me how you would switch on the rear fog light.
- Turn on the ignition
- Turn on the dipped headlights
- Press button to the bottom left of the outside of the centre circle.
- You would know that it’s on because you would see a warning light on the dashboard.
When would you switch on the rear fog light.
When the visibility is less than 100m.
Tell me how you would switch your headlight from dipped to main beam.
- Turn on the ignition
- Turn on the dipped headlights
- Push left indicator towards the dashboard
How would you know if your main beam is on?
A blue warning light will show that the beam is on.