TD 82 Flashcards
Discuss the procedure required to perform under-flight of wires
Min ground clearance hover height plus 25 ft with brisk walk speed
When performing a VMC takeoff, after assessing the takeoff area, wind, and obstacles, the p* will select and announce the type of takeoff. Name the different types
-Normal
-Constant angle
-Vertical
-Level acceleration
When should a level acceleration type takeoff be selected?
When power required to hover is max power available,
The decision to go-around may be made at any time but in limited power situations should be determined before..
decreasing below barriers or decelerating below ETL
An approach to the forward one-third of the usable landing area will reduce the..
approach angle and minimize power requirements
What actions are performed upon contact with the enemy?
-Establish flight profile
-Send report
-Maintain contact
-Execute COA
What are the elements when transmitting a SPOT report?
-Size
-Activity
-Location
-Unit
-Time
-Equipment
While conducting recon mission your attack team….
10 mil personnel
3 vehicles with machine guns
stationary
FV 1124 7077
1815
What is the definition of low level flight?
Constant altitude and airspeed dictated by threat avoidance. 80-200’ AHO
What is the definition of contour flight?
Low altitudes conforming to earth’s contours 25-80’
What is the definition of Nap-of-earth?
Varying airspeeds as close to earth’s surface as permitted 0-25’ above vegetation
The two main types of aerial checkpoints are?
1) Control Point (ACP) Air reference point by terrain or NAVAID for navigation. mission, and comm ACP
2)Communicaiton point (CP) Air reference report to command or ATC