TB 62 2-inch High Rise Hose System & TB 63 Procedures Dor Supplementing High Rise Fire Pumps

Question 1

The high rise hose pack consists of two sections of ____ inch hose with a ____ GPM nozzle?

Answer 1

2” 200gpm

Question 2

Each high rise hose pack consists of how many straps?

Answer 2

5

Question 3

Each high rise pack weighs?

Answer 3

38lbs

Question 4

2” high rise hose can be bent within how many inches before it kicks?

Answer 4

12

Question 5

When forming a high rise pack, place the female coupling of the first section how many inches below the gauge of an SCBA cylinder?

Answer 5

10”

Question 6

Some high rises, you may find 2 1/2” hose cabinets in the stairwell above the _____ floor?

Answer 6

4th

Question 7

The high rise pigtail has a 2 1/2” elbow which is at a _____ degree angle?

Answer 7

60

Question 8

One single layer 2” high rise hose will be _____ inches taller than double layering?

Answer 8

8

Question 9

In a high rise building PRV are used when pressures exceed _____PSI?

Answer 9

150

Question 10

Orface plates are found in all the following k

Answer 10

Soldered to outlet
Behind gasket on the dipcock
Behind gasket on the 2 1/2”

Question 11

All of the following are true why 2” high rise hose is ribbed pressure.

Answer 11

Reduces wear
increasing grip

Question 12

There are a variety of ways to identify a high rise system pressure. The quickest & most reliable way is to locate the?

Answer 12

Locate the FDC’s

Question 13

Who is the person responsible for pumping into a high rise building?

Answer 13

First arriving 200 or 2nd engine

Question 14

High rise buildings over ___ stories or system over ____PSI, another app shall pump half of system PSI?

Answer 14

20 & 250

Question 15

Strap high rise 2 1/2” inlet hose 2 1/2” hose in three places when PSI exceeds?

Answer 15

300

Question 16

High rise inlets signs are required to include all of the following information

Answer 16

Address
Area building served system pressure

Question 17

When supplementing a high rise fire pump, pump 150 PSI to the roof plus 5 PSI per floor, or as an alternate method?

Answer 17

Fire pump discharge gauge

Question 18

High rise system pressure equals all the following

Answer 18

Head pressure
F.L. In standpipe
Required PSI at highest outlet