TB 44 Rotary Saw

Question 1

Rotary saw fuel caps shall be tightened?

Answer 1

Hand tight

Question 2

All of the following are true about the metal abrasive blades

Answer 2

Fabric and fiber base
ID with silver strip
Exchange blade less less than 9”

Question 3

During rotary saw weekly check, check all the following

Answer 3

Sound abnormal
Inspect starter cord
Run until warm

Question 4

What rotary saw blade will you use to cut through soft metals?

Answer 4

Carbide tooth

Question 5

After use of the rotary saw, perform all the following checks

Answer 5

Refuel
Blade guard
CLean entire saw

Question 6

Rotary saw metal blades are used on?

Answer 6

Hard metals, steel alloy

Question 7

Keep the 14” rotary saw blade on the saw until it reaches a minimum size of?

Answer 7

12”

Question 8

Starting procedures: on the k-970, press the air purge diaphragm ____ times?

Answer 8

6

Question 9

Blades that are no longer safe shall be marked with a F-175 tag and the word “unsafe” shall be marked on the___ before forwarding to S&M

Answer 9

Blade

Question 10

Combination “Combi” blade is bi-directional and the continuous cutting depth is _____”

Answer 10

4 1/4

Question 11

Don’t use combination “Combi” blade if any of the following occur

Answer 11

Blade spot along and of the segment
Any segment is fractured, broken or missing
Matrix bond is equal to the thickness of the blade body