Tapes/Chemicals

Question 1

Super 33+

Answer 1

highly conformable, super stretchy, resists UV, abrasion, corrosion
7 mil thick
3/4, 1 & 1 1/2" wide
105*C 
primary insulation for up to 600V
protective jacketing

Question 2

35

Answer 2

highly conformable, super stretchy, resists UV, abrasion, corrosion
7 mil thick
1/2, 3/4” wide
105*C
phase identification and marking, harnessing

Question 3

Super 88

Answer 3

all weather, heavy duty, abrasion resistant
8.5 mil thick
3/4, 1, 1 1/2, 2" wide
105*C
primary insulation for up to 600V
protective jacketing

Question 4

22

Answer 4

thicker for increased mechanical strength and abrasion resistant
10 mil
1/2, 3/4, 1, 1 1/2, 2" wide
80*C
bus bar insulation, cable jacket repair

Question 5

13

Answer 5

rubber tape, semi conductive
30 mil thick
3/4" wide
continuous 90*C, short term 130*C
provide cable shield continuation

Question 6

23

Answer 6

high and low voltage insulation, self-fusing rubber tape
30 mil thick
3/4, 1, 1 1/2, 2” wide
continuous 90C, short term 130C
primary insulation for splicing all solid dielectric cables up to 69kV

Question 7

24

Answer 7

all metal open weave shielding braid, conformable, temp stable
1” wide
continue electrostatic shielding across splice

Question 8

70

Answer 8

arc and track resistant, self fusing, silicon rubber
12 mil thick
1” wide
180*C
protective overwrap for terminating high voltage

Question 9

77

Answer 9

protects cable until limiting devices can interrupt faulted current, silicon rubber, sunlight, acid and arc resistant, self extinguishing
30 mil thick
1 1/2, 3” wide
use on high energy cables that are within 18” of other high energy cables

Question 10

130C

Answer 10

high voltage insulating, thermally conductive, self bonding
30 mil thick
3/4, 1, 1 1/2, 2” wide
continuous 90C, short term 130C
primary insulation for splicing all solid dielectric cables up to 69kV

Question 11

Scotchfil electrical insulation putty

Answer 11

black, self fusing, insulating putty in tape form
125 mil thick
1 1/2” wide
80*C
insulate connections up to 600V, smooth bus bar irregularities

Question 12

27 & 69

Answer 12

Glass cloth tape
woven insulating glass cloth, high temp resistance, high mechanical strength
7 mil thick
130*C & 180*C
heat stable insulation

Question 13

rector shield paste

Answer 13

thermal absorption compound, acts as a heat sink
protects sensitive equipment while soldering, brazing, and welding (specifically used fro differential repair)
no splatter or drip during heating, easy cleanup with water, safe environmentally friendly

rubber gloves, googles or glasses w/ side shields

Question 14

kopr-shield

Answer 14

contains rust & corrosion inhibitors, seals out moisture, prevents seizing on threaded fittings, improves grounds, assures lower contact resistance, rated up to 8kV 90*C

fuse clips, raceway fittings, underground connections, taps/lugs, grounding clamps, slip rings, wiping contacts, drum switches, batter lugs and cables, bus bar connections

glasses

Question 15

white petrolatum

Answer 15

used with graphite to lubricate hinge points on ACBs

use in well ventilated area

Question 16

Powdered graphite

Answer 16

highly conductive of heat and electricity up to 1200F

mixed with lubricating oil or grease

Rubber gloves, googles & dust mask

Question 17

ideal wire lube

Answer 17

stable @ 180*F, freezes @ 28F

rubber gloves, goggles or glasses with side shields

Question 18

G & W high voltage insulating compound

Answer 18

used in potheads

Question 19

alma-plex 1275

Answer 19

motor bearing grease

gloves and glasses

Question 20

aluma-shield

Answer 20

same thing as kopr-shield except for non-ferrous conduit

rubber gloves & goggles or glasses w/ side shield

Question 21

LPS instant super degreaser

Answer 21

heave duty, power blast spray, non-flammable, removes oil, grease, dirt and tar, non-chlorinated, non-conductive, fast evaporating, no rinsing, no residue

rubber gloves & goggles or glasses w/ side shield

Question 22

SSD-II

Answer 22

spray degreaser/solvent
non for use on plastics or styrene products

used to clean corrosion on copper conductors, brushes to prevent arcing and shorting

nonflammable, non residual, non conductive, controlled evaporation

rubber gloves & goggles or glasses w/ side shield & well ventilated area

Question 23

LPS HDX

Answer 23

heavy duty degreaser

used on brakes, bearing, cables, instruments, motors, gauges, glass, gears, high voltage cable connections

not a corrosion prohibitor, must apply lubricant after use

quick penetrating, non flammable, no rinsing, non residual, non conductive, low odor

rubber gloves & goggles or glasses w/ side shield & well ventilated area

Question 24

LPS 1

Answer 24

spray grease less lubricant

safe for use on plastic, paint, fabric, etc

used on cables, electric mostors, locks and hinges, ignitions, micrometers, nuts and bolts, electronic connections

dry thin film, resists dust and oil buildup, displaces moisture, flammable, non conductive

rubber gloves & goggles or glasses w/ side shield

Question 25

LPS 2

Answer 25

spray industrial strength lubricant used on bearing and valves, cables and linkages, slides and tracks, bits and dies, pulleys and rotors, metal parts, hand tolls, engines and electronic motors non drying oily film, long lasting, displaces moisture, protects against corrosion, flammable rubber gloves & goggles or glasses w/ side shield

Question 26

LPS NOFLASH

Answer 26

spray electronic contact cleaner used on switches, relays, contactors, circuits, connectors fast evaporating, quick penetrating, non flammable, non conductive, non residual rubber gloves & goggles or glasses w/ side shield & well ventilated area

Question 27

Chance Z.L.N. 100

Answer 27

petroleum based electrical connection compound and oxide inhibitor. used for better aluminum, copper, and bi-metal connections rubber gloves & goggles or glasses w/ side shield

Question 28

Glyptol 1201

Answer 28

red enamel insulating paint rubber gloves & goggles or glasses w/ side shield

Question 29

Glytex 1202

Answer 29

clear, air drying and baking varnish rubber gloves & goggles or glasses w/ side shield

Question 30

spray kote

Answer 30

red enamel insulating paint rubber gloves & goggles or glasses w/ side shield & well ventilated area

Question 31

collinite insulator cleaner & protector no 240

Answer 31

insulator polish Well ventilated area

Question 32

rigid premium nu-clear thread cutting oil

Answer 32

clear mineral oil with low odor and anti-mist formulation workable viscosity to -20*F rubber gloves & goggles or glasses w/ side shield

Question 33

taps cutting fluid

Answer 33

drilling, tapping, milling, cutting rubber gloves & goggles or glasses w/ side shield

Question 34

siemens electrical contact lubricant

Answer 34

wipe off old grease each inspection, apply new to all sliding surfaces .03-.06" thick goggles or glasses w/ side shield

Question 35

beacon #290

Answer 35

high temp grease rubber gloves & goggles or glasses w/ side shield

Question 36

beacon #325

Answer 36

low temp grease rubber gloves & goggles or glasses w/ side shield

Question 37

epoxylite #8117-62 flexible stator paste

Answer 37

end turn encapsulation rubber gloves & goggles or glasses w/ side shield