Systems - Warning Systems Flashcards
If the upper ECAM screen fails, (FM 8.150.10.2)
E/WD data automatically transfers to the SD.
If the lower ECAM screen fails, what crew action is required to view the data normally contained on the screen? (FM 8.150.10.2)
SD data can be displayed on upper ECAM by pushing and holding any SYS button.
What aural warning sounds during a Level 2 ECAM? (FM 8.150.10.6)
Single chime.
What aural warning sounds when the MASTER CAUT light illuminates?
(FM 8.150.10.6)
Single chime.
A continuous repetitive chime, synthetic voice, or specific sound
indicates a/an (FM 8.150.10.6)
Level 3 ECAM.
What is a characteristic of a level 3 ECAM?
indicates a/an (FM 8.150.10.6)
Requires immediate action.
Blue colored text on the ECAM memo section signifies (FM 8.150.10.5)
Actions to be carried out.
Red colored text on the ECAM memo section signifies (FM 8.150.10.5)
Immediate action required.
A blue item on the takeoff memo indicates a checklist item that is
(FM 8.150.10.5)
To be accomplished.
A cavalry charge aural signal indicates a(an) (FM 8.150.10.10)
A/P disconnected.
A triple click aural sound indicates (FM 8.150.10.11)
Landing capability change.
What does the green arrow on the memo section of the E/WD indicate?
(FM 8.150.20.6)
More than one page of alert messages is available for display on the E/WD.
T.O. INHIBIT is active (FM 8.150.10.8)
From takeoff power application to 1500 feet AGL, or for two minutes after takeoff.
What is the function of the T.O. INHIBIT? (FM 8.150.10.8)
Eliminates unnecessary distractions during takeoff.
The T.O. INHIBIT DOES NOT inhibit which of the following?
(FM 8.150.10.8)
ENG 1(2) OIL LO PR.
The T.O. INHIBIT DOES NOT inhibit which of the following?
(FM 8.150.10.8)
F/CTL L(R) SIDESTICK FAULT.
LDG INHIBIT is active (FM 8.150.10.8)
From 800 feet AGL to 80 knots.
What does pushing the T.O. CONFIG button on the ECAM control panel do? (FM 8.150.20.1)
Simulates takeoff power application to trigger a warning if the aircraft is not properly configured for takeoff.
The T.O. CONFIG button checks allthe following except? (FM 8.150.20.1)
CAB PR LO DIFF PR.
What is a characteristic of the ECAM STATUS page? (FM 8.150.20.2)
Displayed manually by pushing the STS buttonon the ECAM control panel.
What happens when the ECAM EMER CANC button is pushed when a RED ECAM Warning is active? (FM 8.150.20.1)
Present aural warning is cancelled.
Which of the following would cause an ENG THR LEVERS NOT SET warning during takeoff? (FM: 8.150.10.9)
Thrust levers are in the FLEX/MCT detent and a flex temperature was not entered into the TAKEOFF performance page.
