Systems - Flight Instruments, Displays Flashcards

1
Q

What is the actual indicated airspeed shown below. (FM 8.100.20.17)

A

205

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the selected airspeed shown below. (FM 8.100.20.17)

A

230

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What does the blue 1 along the speed scale indicate? (FM 8.100.20.20)

A

V1

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

According to the graphic, minimum slat retraction speed is ______knots.
(FM 8.100.20.21)

A

188

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

According to the graphic, minimum flap retraction speed is
(FM 8.100.20.21)

A

145

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

According to the graphic, what is the UA limit next flap extended speed? (FM 8.100.20.22)

A

220

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What does the amber = sign on the air speed scale indicate?
(FM 8.100.20.22)

A

Next flap extended speed (VFE next).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Lowest selectable airspeed (Vls) is indicated by the (FM 8.100.20.18)

A

Top of the amber strip along the speed scale (this graphic 140 knots).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Alpha protection is indicated by. (FM 8.100.20.18)

A

Top of the black and amber strip along the speed scale (132 knots in this example).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Alpha maximum speed is indicated by the (FM 8.100.20.18)

A

Top of the red strip along the speed scale (125 knots in this example).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Where is Selected Altitude displayed on the altitude scale?
(FM 8.100.20.23)

A

Within a blue box on the altitude scale.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

According to the graphic, the selected altitude off scale is _____ feet.
(FM 8.100.20.23)

A

3000

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

The vertical deviation indicator is depicted on the PFD by
(FM 8.100.20.23)

A

The magenta o on the altitude scale.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

The beta target is displayed when (FM 8.100.20.8)

A

CONF 1 , 2, or 3 and either engine EPR exceeds 1.25 and the difference between EPRs exceeds .25.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

The ground roll guidance command bar provides Flight Director yaw commands when (FM 8.100.20.16)

A

A localizer signal is available during takeoff.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What is the purpose of the sidestick order indication? (FM 8.100.20.16)

A

Allows pilots to observe commanded sidestick deflection during takeoff and landing roll.

17
Q

What is indicated by the green “510” indication on the bottom of the attitude indicator? (FM 8.100.20.24)

A

Radio height.

18
Q

How is flight director (FD) guidance displayed on the PFD in the TRK-FPA mode? (FM 8.100.20.12)

A

By a single guidance bar to indicate desired FPA and bank.

19
Q

When the flight path vector (FPV) is on the horizon line, the
flight path angle of the airplane is ______ degrees. (FM 8.100.20.12)

20
Q

Flying the flight path vector (FPV) 3 degrees below the attitude indicator horizon line will always produce (FM 8.100.20.11)

A

A 3 degree flight path below the horizon.

21
Q

What is indicated by the green arrow under the green 050/65?
(FM 8.100.20.29)

A

Magnetic wind direction.

22
Q

According to the graphic, what is the groundspeed of the airplane in knots? (FM 8.100.20.29)

23
Q

Which ND mode displays the glideslope deviation diamond?
(FM 8.100.20.34)

A

Rose ILS mode.

24
Q

(319/320 as installed) A DMC failure is indicated by (FM 8.100.20.41)

A

A diagonal line on three DUs.

25
Q

According to the graphic, the #3 DMC is providing information to the Captain’s (FM 8.100.20.41)

A

PFD, ND, and the E/WD.

26
Q

What control will you use if the Captain’s PFD, ND and upper ECAM screen have a diagonal line through them? (FM 8.100.20.41)

A

Place EIS DMC selector to CAPT 3 position.