Spielbook Flashcards
Chainsaw Addl Equipment
2 ladders (escape routes) Roof ladder Thermal Imager Roof hook/ pike pole Axe and Ladderman's Belt Square nose shovel Rope bag/drop bag Partner Charged hose line Fuel and filter funnel Tools to maintain and clean saw
Portable Generator Description, Usage, Accessories
Description:
-One cylinder, four stroke cycle, honda 13hp gasoline powered generator
Usage:
-To provide power to department electrical equipment
Accessories:
-Four 3 prong outlets
-One 3 prong twist lock outlet
-One 4 prong twist lock outletPortable Generator Spec, Addl Equip, Safety
Specifications:
-120/240 volt AC current
-6500 watt output
Additional Equipment:
-Unleaded fuel and filter funnel
-Extension cord
-Electrical adaptors
Safety Precautions:
-Wear full protective safety gear & eye pro
-Never ground generator
-20 amp fuse for overload
-Switch to turn electricity on and off
-Never start or stop motor under loadElectric Ramfan Description, Usage, Specs
Description:
-805 watt, 110/220 volt, 2 horsepower, high velocity flow, stackable, ramfan turbo ventilator
Usage:
-Ventilation
Specifications:
-16” diameter fan with 21 cast aluminum turbo blades
-Weight 49 lbs
-Free flow is 3000 cfm
-Duct flow is 2375 cfm
-Non sparking lexan polycarbonate housing
-Uses 12” or 16” duct for confined space
-Motor is intrinsically safe for confined space use
Class I, Group D Gas and Vapors
Class II, Groups E, F, G Combustible Dust
Electric Ramfan Addl Equip and Safety
Additional Equipment:
-Source of power
-Extension cord
-Electrical adaptors
Safety Precautions:
-Wear full protective safety gear and eye protection
-Keep hands away from grill
-Keep curtains and other objects away from intake side of blower
-Only use department generator or properly tested house current
Gas Ramfan Description, Usage, Specs
Description: -One cylinder, four stroke cycle, Honda 5.5hp, gasoline powered, five position, rapid tilt, ramfan turbo ventilator Usage: -Ventilation Specs: -Unleaded fuel only -16" diameter fan with 21 cast aluminum turbo blades -Weight 84 lbs -Air flow Actual - 6500 cfm -Entrained - 13000 cfm -Oil alert protection system -Full width locking handle -Heavy duty wheels and rock guard for use in rough terrain -Run time 58 minutes
Gas Ramfan Addl Equip and Safety
Additional Equipment:
Unleaded fuel and filter funnel
Smoke - O
Safety Precautions:
Wear full protective safety gear and eye protection
Keep hands away from grill
Keep curtains and other objects away from intake side of blower
Position ejector so as not to obstruct ingress and egress of personnel
Do no move while in operation
Wear hearing protection when in close proximity to ejector
Thermal Imager Description, Usage, Specs
Description:
MSA Evolution 5200 Thermal Imaging Camera, detects and converts thermal energy radiated/generated from surrounding objects into a visual image
Usage:
Search and Rescue
Size up and scene assessment
Locate seat of the fire and extension
Identify potential flashover
Determine entry and ventilation points
Overhaul
Hazmat incidents
Specifications:
Weighs 2.8 lbs
Powered by rechargable lithium ion battery
2 hour operating time
On screen system status LED indicators
High and low sensitivity modesThermal Imager Addl Equip and Safety
Additional Equipment:
Retractable lanyard
Apparatus charging system
Additional Battery
Safety Precautions
Do not rely on the TIC as the sole means of navigation or deviate from SOPs during use
Thermal energy is not transmitted through glass or water and may be reflective off of smooth surfaces
Not intrinsically safe
Flashing red battery LED indicates batery shutdown is imminent
Flashing red “over temp” LED indicates TIC has exceeded operations thermal limits
TIC system fault indicator - all five LEDs flash
Clean with mild soap and water, wipe with soft terry cloth towel
Ladder Maintenance and Safety
Every Saturday and after each use inspect ladders for:
Loose bolts or rivets
Damaged hardware
Damage to structural components
Heat sensor label discoloration
Worn Halyard
Cleaning:
Clean with clear water (dry with chamois)
Lube pulley and locks with light weight oil prn
Lube guides with graphite
Safety Precautions:
Wear full protective safety gear including helmet and gloves
Watch hand placement with upping/downing the fly
Lift ladder with legs and not back
Tie excess halyard off to prevent tripping
Tie beam off to solid surface to stabilize ladder
Watch for under and above ground sources of electricity
Ladder components
Beam Bed Bottom/butt Fly Guides Halyard Heat Sensors Locks Pulley Rungs Spurs Stops Top Truss Truss block/ rung plate
Airbag Sizes
KPI 12 — 15”x15” —- 12 Tons – 8.2”
KPI 17 — 15”x21” —- 17 Tons – 9.2”
KPI 22 – 20”x20” – 21.8 Tons – 11.1”
Electric Drill Description, Usage, Accessories
Description: 1100 Watt, 115 volt, 1/2" reversible electrically powered drill Usage: Overhaul Water Removal Accessories: Stabilizing Handle Two 2 3/4" Auger bits 18" extension Assorted wood and metal bits
Electric Drill Addl Equip and Safety
Additional Equipment:
Goggles
Grounding Cord
Extension Cord
Source of Power
Source of Extinguishment
Pry Tool
Safety Precautions:
Wear full protective safety gear and eye pro
Ground tool when cutting into concealed space
Unplug cord when changing bits
Only use department generators or properly tested house current
Have firm stance and grip before starting drill
Holmatro Description, Usage, Specs
Description: One cylinder, four stroke cycle, gasoline powered HCT-3150 combination rescue tool Usage: Rapid intervention for medium to heavy rescue Specifications: PPU-20 Power Unit: Unleaded fuel only Weight 51.8 lbs 1.6 horsepower 2 stage radial pump 3 quart fuel capacity 60 dba noise level at 15 feet Uses non toxic mineral base fluid for hydraulic operations (1.8 quarts) HCT-3150 Max spreading force - 15,000 lbs Max spreading distance - 14" Cutting force at notch - 67,600 lbs Squeezing force at tips - 11,900 lbs Maximum working pressure - 10,500 lbs Weight - 34.5 lbs
