site layout and prep Flashcards
Good grounding in a substation yard is essential in order for relays to be activated to open switchgears during ground faults.
true
The ideal location for a substation is ? , but out of public view.
close to the load center
When an engineer plans for stormwater drainage or the flow of oil released accidentally, he or she will refer to a ? map.
topographical
Soil resistivity is a factor in site selection because soil with a high resistance may require compensation measures so that the ?
ground grid operates properly
Fill areas should be compacted in eight-inch layers to ? of the maximum density as mandated by ASSHTO Standard T180.
95%
The definition of the term soil ? is to mechanically increase the density of the soil.
compaction
Increasing soil density by putting particles in motion and moving them closer together is the ? method.
vibration
The four types of compaction are further divided into two basic types. These basic types are the ? type and the vibratory type.
static
In soil with too much moisture, the particles cannot move past each other, resulting in inadequate compaction.
false
Rammers cover three types of compaction and operate within a range of ? blows per minute.
500 to 750
A soil type with cohesive properties is ?
clay