Short Spiels Flashcards
Thermal imager
Description: FLIR K65 thermal imaging camera (TIC). Detects and converts thermal energy radiated/generated from surrounding objects into a visual image.
Usage: Search and rescue Size-up and scene assessment Locate seat of fire and extensions Identify potential flash over Determine entry and ventilation points Overhaul Hazmat incidents
Specifications:
Weighs 2.4 lbs
Powered by rechargeable lithium ion batteries
4-hour operating time
2x digital zoom
Image modes: basic mode, black and white mode, fire mode, search and rescue mode, heat detection mode
Additional equipment: Retractable lanyard Apparatus charging system Additional battery Start screwdriver
Safety precautions:
Do not rely on the thermal imaging camera as the sole means of navigation or deviate fro. Standard operating practices during use.
Thermal energy is not transmitted through glass/water and may be reflective off smooth surfaces.
Intrinsically safe.
Clean with mild soap and water, wipe down with soft Terry cloth towel.
Electri RAMFAN
Description: 805 watt, 110/220 volt, 2 horse power, high velocity flow, stackable, RAMFAN turbo ventilator.
Usage: Ventilation
Specifications:
16 inch diameter fan with 21 cast aluminum turbo blades.
Weight 49 lbs.
Free flow = 3,000 cfm
Duct flow = 2,375 cfm
Non-sparking lexan polycarbonate housing.
Uses 12 or 16 inch ducts for confined space.
Motor is intrinsically safe for confined space use:
Class I, group D = gas and vapors
Class II, group E F G = combustible dust
Additional equipment:
Source of power.
Extension cord
Electrical adaptors
Safety precaustions:
Wear full protective safety gear and eye protection.
Keep hands away from grill.
Keep curtains and other objects away from intake side of blower.
Only us department generator or properly tested house current.
Gas RAMFAN
Description: 1 cylinder, 4 stroke cycle, Honda 5.5 horse power, gasoline powered, 5 position, rapid tilt, RAMFAN turbo ventilator.
Usage: ventilation
Specifications:
Unleaded fuel only.
16 in diameter fan with 21 cast aluminum turbo blades.
Weight 84 lbs.
Air flow: actual = 6,500 cfm. V pattern = 13,000 cfm.
Oil alert protection system.
Full width locking handle.
Heavy duty wheels and rock guard for use in rough terrain.
Run time 58 minutes.
Additional equipment:
Unleaded fuel and filter funnel.
Deodorizer, “smoke- O”
Safety precautions:
Wear full protective safety gear and ey protection.
Keep hands away from grill
Keep curtains and other objects away from intake side of blower.
Position ejector so it will not obstruct ingress or egress of personnel.
Do not move while in operation.
Wear hearing protection when in close proximity to ejector.
Portable generator
Description: one cylinder, 4 stroke cycle, 13 horse power gasoline powered honda generator.
Usage: provide electrical power to equipment.
Specifications:
120/240 volt AC current
6500 watt output
Accessories:
4 3 prong outlets
1 3 prong twist lock outlet
1 4 prong twist lock outlet
Additional equipment:
Unleaded fuel and filter funnel
Extention cord
Electrical adaptors
Safety precautions: Never ground generator 20 amp fuse for overload Switch to turn electricity on and off Never start or stop motor with load on it (equipment attached)
Ground extension ladders
Description: 24, 28, 35 and 40 foot ground extension ladders, 12 to 16 foot roof ladders, 20 foot wall ladder.
Usage: ingress and egress above and below ground.
Specifications: Beam Bed Bottom/butt Fly Guides Halyard Heat sensors Hooks Locks Pulley Rungs Spurs Stops Top Truss Truss blocks/rung plate
Safety precautions:
Wear helmet.
Watch hand placement when extending and retracting fly.
Lift ladder with legs not back.
Tie excess halyard off to prevent tripping.
Tie beam off to solid surface to stabilize ladder.
Watch for under and above ground sources of electricity.
Maintenance:
Every Saturday and after each use inspection ladder for: loose bolts or rivets, damaged hardware, damage to structural components, heat sensor label discoloration, worn halyard.
Cleaning: clean with clear water (dry with chamios), lube pulley and locks with lightweight oil(as needed), lube guides with paraffin wax.
Chainsaw
Descriotion: one cylinder, 2 stroke cycle, gasoline powered chain saw.
Useage: ventilation, forcible entry, and rescue
Soecification: 3.72 cubic inch engine 12,000 RPM max speed 20.063 inch guide bar with RDR chain or 24.05 inch guide bar with RDF brush chain. Hand guard with chain break. 50:1 fuel oil mixture. Lubricate with 30 wt oil. Weight 19lbs
Accessories:
Slot screw driver/socket tool (scrench)
Additional equipment:
TruFuel 50:1 mix
Spare chain
Safety precaustions:
Wear gloves, safety gear, and eye protection while working on saw and full PPE for ventilation operations.
Never lug or bind chain.
Change chain when any teeth are missing.
Avoid cutting with tip to prevent kickback.
Set chain brake when traveling with a running saw and when in close proximity to other personnel.
Rescue saw
Description: one cylinder, stroke stroke cycle, gasoline powered rescue saw.
Specifications: 5500 rpm max speed. 14 inch diamond tip combination blade carried on saw. 50:1 fuel oil mixture. Equipped with adjustable blade guard.
Accessories:
Blade: carbide tip, wood and masonry.
Tools for changing blades.
Additional equipment: Slot screw driver/socket tool (scrench) Star tool. TruFuel 50:1 mix Extra blades.
Safety precautions:
Wear full safety protive gear and eye protection.
Ensure RPM rating on blade is higher than the saws RPM.
Check proper blade direction.
Clear area of unnecessary personnel when starting saw.
Check and clear area of flammable objects.
Be cautious of sparks and the possibility of blade disintegration.
Never lug or bind the blade.
Never adjust blade guard while blade is spinning.
Reciprocating saw
Description: Milwaukee 28 volt lithium ion M28 Sawzall reciprocating saw, uses high powered Milwaukee built motor to deliver faster cutting performance.
Usage: vehicle extrication, overhaul, ventilation, forcible entry.
Specifications: Lithium ion battery. Keyless blade change. 1-1/8 inch stroke length. 3000 strokes per minute.
Accessories:
Demolition blade carried on saw
Additional equipment:
Battery charger.
Extra batteries
Extra blades
Safety precautions:
Wear full protective safety gear and eye protection.
Adjust blade depth if needed.
Airbags
Description: maxi-force airbag systems are multi-application inflation system.
Usage: lifting and displacement of heavy rigid objects.
Specificafions:
Piston type high pressure regulator:
Reduces inlet pressure from 4500 psi to 135 psi.
Working pressure of system is 118 psi.
Relief valve is factory set at 150 psi.
Dual (Dead man) safety relief and control:
Single input/dual output
118 psi relief valve
Interconnecting hoses:
3 16 foot sections of hose
Color coded and interchangeable
Airbags:
Neoprene, reinforced with 3 layers per side of Kevlar reinforced fabric
118 psi working pressure
Size range from 6x6 up to 36x36 inch
Coming bag specifications:
Model KPI-12 KPI-17 KPI-2P
SIZE. 15X15. 15X21. 20X20
capacity 12ton. 17ton. 21.8ton
Height. 8.2in. 9.2in. 11.1inch
Additional equipment:
Cribbing
Crow bar
Safety precautions:
Wear full protective safety equipment and eye protection.
Never stack more than 2 bags.
Come a long
Description: model C-400H come a long
Usage: to raise or pull load, lower or release loads and stabilize objects.
Soecifications: 3 hooks. 20 foot cable Single line capacity = 1700 lbs Double line capacity = 3400 lbs
Additional equipmemt:
Grab hooks and chains
Shackle hooks
Cribbing
Safety precautions:
Wear eye protection and working cloves.
Maintain 3 or more wraps of cable on drum.
Handle will bend when unit is overloaded C (safety feature).
Do not reach around corners.
Do not use for lifting, lowering or moving person.
Pull in straight line.
Do not use as a sling or choker.
Request 42 struts
Description: rescue 42 struts and straps.
Usage: stabilization of vehicles, heavy machinery and structures.
Specifications:
Telescoping composite struts.
2 long struts (3 to 8 foot)
2 short telescoping composite struts( 2 to 5 foot).
Struts have rust and chemical resistant coating.
Accesories: 4 red ratchet straps (27 foot length) A-frame head Cobi-head Screw jack head Cinch ring Composite and metal pins Hook cluster Spike foot Chains
Additional equipment:
Batery pack
Cribbing
Safety precaustions:
Strap factory rating = 10,000 lbs.
SDFD working = 3,335 lbs (3:1 safety ratio)
Strut rating = refer to chart on struts
Wear full protective safety equipment and eye protection.
Ensure metal pins in baseplate only and composite pins are set prior to operation.
After operation loosen straps slowly with handles released. If unable to release handle a screwdriver may be used to release drum.
Keep struts between 45-70 degrees for safety (45 degree preferred).
Can be used for lifting and stabilization of objects.
Do not extend past orange mark.
Maintenance:
Clean with mild soap and water.
Inspect for cracks, dents, splintering or bowing.
Personal escape system (PES)
Description: a five piece kit containing a belt, tether, hook, rope and descent control device. PES is an integral part of structural PPE.
Usage: used for firefighter emergency escape from upper floors.
Specificafions:
Extreme-rescue belt, class I harness, equipped with additional D ring.
Safe-D carabiner has 3 stage selt-locking design, captive eye pin prevents side loading.
Sterling lightning GT hook with gated hitching slot and attached pull strap.
Escape rope: 50 foot 7.5mm technora sheath with nylon core, 3,900 lbs breaking strength and heat resistant to 930F.
Halo descent control device with auto stopping feature.
Total system weight: 2lbs 14oz
Additional equipment:
Full structural PPE. And portable radio.
Fircible entry/exit tool
Safety precautions:
Wear full PPE and SCBA.
Call mayday to notify personnel of your situation.
Ensure hook is properly placed and set prior to exiting window.
Ensure two raps through hitching slot on remote anchor.
Ensure PES is properly inspected and repacked after each use.
