Safety Computer engineering Flashcards
Always wear___________
Safety Glasses
Where do you keep soldering irons when not in use??
Protective stand
How do you cut lead wires?
Away from others so that the clippings fall on the table
Where should u not touch on a soldering iron
The tip of the soldering iron
what do you avoid when working with AC powered units
Earth Ground
When do you use power units
Only when necessary for troubleshoot
What to avoid with chemicals
Skin contact
How many screws do you replace
All screws
what do you always use when cleaning
the correct cleaning solution
what to avoid when putting equipment back together
pinching the wires together
What do you use when tempering with soldering temperature sensitive components
Heat sink
What not to do when power is applied
Never solider
What do you observe when connecting polarize components
Polarity
What to avoid when soldering a multi pin component
Excessive heating to one area and going from pin to pin in a straight line
What do you do prior to taking a measurement
Test equipment for function and range
What do you do when measuring uncertain qualities
Range= highest setting
How do you avoid signal radiation
replacing shields that were removed during service
what must you do to circuits before applying power
Double check for proper connection and polarity
How do you use an x-acto knife
Cut away from yourself
How long should you apply heat from a soldering pencil to avoid heat damage
A few seconds
what should the intensity of oscilloscopes to avoiding burning out
Low settings
What should you observe when connecting components for circuits
Polarity
Always read ___________
MSDS
what is MSDS
Material safety data sheet
