Repairability Test Flashcards
Introduction
“Hello, I’m Travis Dunn with Alpha Contractors. Today is [Date], and I’m conducting a repairability test on this [Shingle Type] roof in [City], [State], for [Customer Name]. The goal is to determine if individual shingles can be replaced without causing further damage.”
Step 1: Visual Inspection
Action: Examine the target shingle and surrounding area.
“I’m inspecting for signs of brittleness, cracking, granule loss, or pre-existing damage. Also, checking the sealant strips for proper adhesion.”
Step 2: Marking the Test Area
Action: Use chalk to outline the shingle and adjacent areas.
“Marking the test area with chalk to clearly identify the section being evaluated. This helps in documenting and referencing the specific area during and after the test.”
Step 3: Loosening the Sealant
Action: Gently insert a flat bar under the shingle tab to break the seal.
“Carefully loosening the sealant strip to avoid tearing the shingle or removing excessive granules.”
Step 4: Lifting the Shingle Tab
Action: Slowly lift the shingle tab just enough to expose the fasteners beneath.
“Lifting the shingle tab to access the nails, observing for any signs of cracking or tearing.”
Step 5: Removing Fasteners
Action: Use the flat bar to remove the nails securing the shingle.
“Removing the nails holding this shingle in place, taking care to prevent damage to adjacent shingles.”
Step 6: Assessing Shingle Condition
Action: After removing the shingle, inspect both the removed shingle and the surrounding shingles for damage.
“Checking the condition of the shingle and surrounding area. If the shingle cracks, tears, or loses significant granules during this process, it may not be repairable without further compromising the roof.”
Conclusion:
“Based on these findings, if the shingles are too brittle or the process causes significant damage, repairs may not be viable. In such cases, a full roof replacement would be recommended to ensure the integrity of the roof system.”
Closing:
“Thank you for watching. If you have any questions or need further information, please feel free to contact me.”
