Quiz 2 Mod 2 and Mod 2a Discussions

Question 1

Fill in the missing word.

An Act is a ___________ passed by parliament to provide for a safe working environment.

A) standard
B) regulation
C) law
D) code

Answer 1

C) law

Question 2

What does the acronym CSA stand for?

A) Canadian Standards Association
B) Canadian Safety Association
C) Canadian Standards Administration
D) Canadian Space Agency

Answer 2

A) Canadian Standards Association

Question 3

What organization determines the frame size of an electric motor?

A) ANSI
B) NEMA
C) ASET
D) CSA

Answer 3

B) NEMA

Question 4

Where would you find information on standards for control and measurement signals?

A) ISA
B) NEMA
C) CEC
D) ASME

Answer 4

A) ISA

Question 5

The purpose of instrumentation standards, codes, regulations and rules is to:

A) Enforce rules and regulations for only specific industries.

B) Make all equipment identical

C) provide a means of conducting a safe, efficient and common work environment in instrumentation

D) provide for accurate measurements

Answer 5

C) provide a means of conducting a safe, efficient and common work environment in instrumentation

Question 6

If you need to refer to a pressure related regulation, you would research:

A) ABSA
B) OH&S
C) ISA
D) CEC

Answer 6

A) ABSA

Question 7

Where would you go if you wanted to know about safe working practices on the job site?

A) ABSA
B) ASME
C) CSA
D) OH&S

Answer 7

D) OH&S

Question 8

Can a consumer alter a CSA approved product and maintain the CSA acceptance?

A) No, this can never be done
B) Yes, only if CSA approval is re-applied for and granted.
C) Yes, if the proper tools are used
D) Yes, only if the product is ISO certified

Answer 8

B) Yes, only if CSA approval is re-applied for and granted.

Question 9

What does ANSI stand for?

A) American National Standards Investigations
B) American National Service Institute
C) American National Standards Institute
D) American Native Service Industries

Answer 9

C) American National Standards Institute

Question 10

A specific, provincial safety act, updating a pressure regulation and approved by a Legislative order, has__________________

A) The approval of the general public
B) Universal effect in all jurisdictions
C) Universal effect across all industrial sectors
D) The force of law

Answer 10

D) The force of law

Question 11

The Alberta Safety Code Act:

A) Is the overarching act under which more specific regulations exist

B) deals with inclusion of standard organizations to support the various safety laws

C) deals only with specific safety rules

D) must be voted on in the legislature

Answer 11

A) Is the overarching act under which more specific regulations exist

Question 12

What organization regulates the use of a pressure safety valve ( PSV )?

A) ISA
B) ABSA
C) ANSI
D) CSA

Answer 12

B) ABSA

Question 13

What is a PSV used for?

A) to relief dangerous pressures in a vessel
B) to initiate a safety shutdown of the process
C) to control the upstream pressure in a gas metering run.
D) to maintain a specific operating pressure

Answer 13

A) to relief dangerous pressures in a vessel

Question 14

What is the intent of AGA 3?

A) To measure the flow of gas across an orifice plate
B) To measure the flow of liquids across an orifice plate
C) To measure the flow of multi phase components across a meter
D) To measure the flow of gas across a positive displacement meter

Answer 14

A) To measure the flow of gas across an orifice plate

Question 15

What organization should I consult in order to research the 9001 quality standard?

A) CEC
B) ISA
C) CSA
D) ISO

Answer 15

D) ISO

Question 16

A pressure safety relief valve must:

A) be sealed and the seal must be maintained upon operation and servicing

B) be sealed but the seal can be removed when serviced, and resealed upon operation, without certification

C) be sealed during normal operation, but the seal must be removed for servicing and then re-certified before being resealed.

D) be sealed and the seal can be broken when tested, and will not require resealing, until the next service cycle.

Answer 16

A) be sealed and the seal must be maintained upon operation and servicing

Question 17

What section in the CEC covers bonding and grounding?

A) 3
B) 18
C) 10
D) 1

Answer 17

C) 10

Question 18

Where can the regulations or codes be found which deal with rules for Area Classification of Hazardous locations?

A) ISO
B) ISA
C) CEC
D) ASME

Answer 18

C) CEC

Question 19

In which of the following regulations or codes can you find rules for Personal Protective Equipment?

A) IEC
B) CSA
C) ISO
D) OH&S

Answer 19

D) OH&S

Question 20

What organization ensures fairness when filling up your car at a gas station?

A) North American Free Trade Agency
B) Municipal Affairs
C) Measurement Canada
D) American Gas Association

Answer 20

C) Measurement Canada