QC QUESTIONS PART II Flashcards
If manning allows response to only one alarm during multiple alarm activation, emphasis will be placed on the alarm with the lowest priority, True or False?
False, it will be placed on the alarm with the highest priority.
Before locking down a specific badge, what do you need first?
Individuals Name.
What is used to look up someone’s badge number?
Master Restricted Area Badge Listing (MRABL.)
What are the steps to deactivating a RAB after getting their name and badge number?
Use the “PC Smart Pac #248”
Press “F11” then press “ESC” to access the main menu
Press “F2” Labeled “personnel” to access the MRABL
Press the spacebar, then enter the badge number
After the badge number is entered , press “Enter” to show the persons name
Press “Enter” again to access the individuals badge information
Then press “F1” labeled “Deactivate”
Note: Reactivate by following the same steps, but “F1” will be labeled “Activate” on the last step.
What is a Catastrophic Failure?
When the entire system or a major portion of it is inoperative.
What is a Major Malfunction?
A facility or individual resource IDS component failure that would allow an intruder to gain access to a resource without crossing a line of detection or detection capability.
What is a Partial Failure?
When an intruder can cross only one sensor providing a detection capability without being detected in areas where two or more sensors from a line of detection in the boundary.
What are the detection requirements?
Must detect all reasonable intrusion scenarios including surreptitious attempts to spoof and tamper with the line of detection.
Ability to identify the presence of an intruder or unauthorized personnel.
The Approach Zone normally extends to at least how many meters from the area’s first line of detection?
300 Meters
Wide Area Detection Systems are used to do what?
Detect vehicular and/or pedestrian movement in the Approach Zone and will cover likely avenues of approach.
Facilites manned 24 hours a day are NOT required to have IDS as long as they have a duress alarm that terminate at the BDOC. True or False?
True
Regarding detection, what is a requirement for a PL-1 asset?
One line of detection at the RA boundary and one line of detection at each facility or individually exposed resource.
Lines of detection for PL-1 and PL-2 resources must meet a probability of detection of .95 at what percent confidence level?
90 Percent
The AF allows uncensored areas, or dead zones, in facilites as long as they do not allow intruders to reach the resource before setting off an alarm.
True
Who must be used to purge the facility before securing it during a Stay Behind Threat situation?
Owner/user
