Q400 Flows Flashcards
Acceptance Flow
fwd out flow valve, oxygen, anti-skid test, clock, landing gear test, PFD/MFD on, FMS on, arcdu on, alt landing gear
Engine Start Flow
APU bleeds off, engine bleeds off, Fasten Belts, Anti-collision lights (red), wing inspect lights (on), #3 Hyd on
After Start Flow
bleeds 1 and 2 on (turn on as soon as each engine is started), de-ice pressure 18
Pushback Flow
MFD to nav, transponder on
Taxi Flow
control lock off, auto-feather on (ED), tank aux pumps on, stdby hyd on, ptu on, #3 hyd isolation open, check fwd & aft elevator movement, #3 hyd isolation back off, elevator check full up & right full left and back, fuel (min/onboard)
Before Takeoff Flow
“FAs please be seated for departure”, TCAS/Transponder on, Control lock, bleeds set per the release (usually min/on)
After Takeoff Flow
flaps zero, cond levers to 900, auto feather off, tank aux pumps off, stdby hyd off, ptu off, cabin press (climbing), ice protection
In Range Flow
Tank aux pumps on, “FAs prepare for arrival”
Approach Flow
stdby hyd on, ptu on, chime
After Landing Flow
radar off, mfd: elec page, transponder stdby, control lock on, flaps zero, auto feather off, tank aux pumps off, yaw damp off, bleeds on, ice protection off, main bus tie tie
Shutdown Flow
bleeds 1 and 2 off as we stop, stby hyd & PTU off once CA sets parking brake
Safety Check Flow
Radar, Emerg Brake, Control lock, Lnd Gear,Battery switches, Bus Tie, GPU/APU, Position Lights (on), Safety Equip
Immediate Return Flow
Autofeather off, weight check, vspeeds, gpws flap setting, appr brief
Flow “Triggers
Safety Check: Radar Acceptance: Fwd outflow valve Start: Bleeds off After Start: Bleeds on After Pushback: MFD to nav Taxi: Control lock off Before Takeoff: "FAs please be seated" After Takeoff: Flaps 0 In Range: Tank Aux pumps on Approach: Stby Hyd & PTU After Landing: Radar off Shutdown to line: bleeds off