Professor Messer Flashcards
a network admin has received a trouble ticket complaining of port flapping on an ethernet switch. which of the following would be the MOST likely reason for this issue?
A. firewall rule is blocking traffic
B. Faulty crimp on an Ethernet connector
C. Excessive jitter measurements
D. Duplex mismatch
Faulty crimp on an Ethernet connector
a user has powered on their computer and received the message “Operating system not found.” a check of the system shows that the SATA drive cables are properly connected. which of the following would be the next best troubleshooting step?
A. Boot to safe mode
B. Replace the boot drive
C. Restore from a know good backup
D. Check for removable drives
Check for removable drives
a clients laptop appears to boot normally, but nothing ever appears on the LCD. after closer inspection, you notice the output is visible but its to faint to clearly see anything. what is MOST likely the cause of the issue?
A. Video card
B. Inverter
C. Video driver
D. Power adapter
Inverter
which of the following would most likely be found on an optical drive?
A. Document archive
B. Operating system boot files
C. RAID parity files
D. BIOS configuration
Document archive
a user need to connect their laptop to the wired Ethernet network, but the laptop does not have an integrated Ethernet interface. which of the following would allow the laptop to connect to the Ethernet network? Pick 2
A. Docking station
B. VGA interface
C. USB to Ethernet adapter
D. Displayport to Ethernet connection
E. DVI to HDMI adapter
F. Bluetooth
Docking station
USB to Ethernet
a server admin has received an alert showing one drive in a RAID 1 array has failed. which of the following would be the best way to resolve this issue?
A. Replace the bad drive and resync the array
B. Replace all the drives in the array and resync the array
C. Replace the bad drive and restore from backup
D. Convert the array to RAID 0 and replace the drive
E. Replace all the drives in the array and restore from the backup
Replace the bad drive and resync the array
a system admin is building a server for a data center in another country. the server will manage a print queue and provide a local storage partition for temporary file transfers. which of the following power supply specifications will be the MOST important for this server?
A. Voltage input option
B. Number of PCIe connectors
C. Modular cabling
D. Fan noise ratings
Voltage input options
which of these technologies do not require a backlight to provide a viewable display?
A. LCD
B. IPS
C. OLED
D. LED
OLED
a network admin is troubleshooting a network outage, and she believes the issue is related to a bad switch. the old switch is then replaced with a newer model and the cabling is moved to the new switch. which of the following should be the next troubleshooting step?
A. Test the theory
B. Verify full system functionality
C. Establish a plan of action
D. Identify the problem
E. Document the findings
Verify full system functionality
Document the findings
a newly installed MFD provides an option to “scan to SMB.” which of the following would best describe this feature?
A. Print jobs can be sent from mobile devices
B. All scans are checked for malware
C. Files are stored on a Microsoft share
D. Documents are scanned from the cloud
Files are stored on a Microsoft share
SMB server message block shares files, print jobs and other info on Microsoft
what type of device connects multiple computers to the network, but becomes less efficient as network traffic increases?
A. Switch
B. Hub
C. Repeater
D. Router
Hub
a network admin would like to enable DHCP on a laptop, but they would like the same IP address to be assigned to the laptop each time it starts. which of the following would provide this functionality?
A. Create an IP reservation on the DHCP server
B. Administratively configure the laptops MAC address
C. Use APIPA addressing
D. Assign the laptop to the static IP VLAN
Create an IP reservation on the DHCP server
a user is complaining about slow network performance from their workstation. a network tech checks the data closet and finds the wires are not properly seated in the 110 block. which of the following should the tech use to correct this issue?
A. Crimper
B. Multimeter
C. Punch-down tool
D. Cable tester
Punch down tool
a help desk tech needs to use different Windows versions to study for an industry standard certification. the tech currently uses a Windows desktop computer with 4GB of RAM and a 750GB free on the HDD, which of the following would be the best way to finish this task? choose 2
A. Install a second monitor
B. Install an additional hard drive
C. Create a Windows Recovery Environment boot drive
D. Upgrade the system RAM
E. Install Windows guest VM
Upgrade the system RAM
Install Windows guest VMs
sam, a user in the accounting department, is migrating from Android to iOS. she would like all her emails, contact list, and calendar events to be moved to her new phone. which of the following would be the BEST way to accomplish the task?
A. Use a Windows based migration tool
B. Save the Android phone as a CSV file
C. Connect the new phone to the corporate Microsoft 365 service
D. Use a USB to Lighting cable
Connect the new phone to a Microsoft 365 service