Comptia+ Flashcards
a technician goes to a classroom to troubleshoot a projector that occasionally powers off. the tech recreates the issue and notices the projector will not power back on until approximately 15 min have passed. after 15 min of being powered on, the projector shuts off again. which of the following should the tech perform NEXT to resolve the issue?
A. Clean the filter
B. Adjust the standby timeout
C. Check the power cable connection
D. Replace the bulb
Adjust the standby timeout
which of the following would an admin use to migrate virtual machines from one premises to the cloud?
A. IaaS
B. PaaS
C. SaaS
D. DaaS
IaaS
a tech is replacing a ribbon on a printer that produces faded text and images when printing. which of the following types of printers is the tech workingon?
A. Impact
B. Inkjet
C. Laser
D. Thermal
Impact
A drive failed on a server that was leveraging a RAID disk configuration. the server admin would like to rebuild the array so it can withstand a potential multidrive failure in the future. which of the following RAID configurations will the admin MOST likely use?
A. 0
B. 1
C. 5
D. 10
10
a user is expecting a visit from a new costumer, and the company’s ADSL link has suddenly gone down. which of the following should the user do to access a smartphones 4G internet connection from the laptop?
A. Set up a VPN
B. Configure a Hotspot
C. Activate NFC
D. Use a USB cable
Configure a Hotspot
a tech is monitoring all outbound traffic in a SOHO. which of the following is the MOST cost-effective solution to monitor traffic?
A. Spectrum
B. Network tap
C. Loopback plug
D. Toner probe
Network tap
a new employehas been issued a company laptop. the employee requests an accessory with a single power source that has wired network connectivity and supports a keyboard, mouse, speakers, and dual monitor’s. which of the following accessories should the system admin deploy to BEST meet the new users needs?
A. PoE switch
B. USB-C hub with power delivery
C. Docking station with DisplayPort
D. KVM with audio
USB-C hub with power delivery
a customer is using a satellite internet connection that is experiencing slowness. a tech notices high latency while pinging, but the download test is performing perfectly with very good download speeds. which of the following represents the NEXT action the tech should perform?
A. Restart the modem and run an online internet connection and speed diagnostic
B. Guide the on how to upgrade the internet plan with the provider in order to improve latency
C. Explain to the customer that is not an issue, the situation is normal
D. Replace the modem because it is not working correctly based on the test result
Restart the modem and run an online internet connection and speed diagnostic
an end user contacted a tech about a laser printer that was no longer printing images on the left side of the page. the tech replaced the toner cartridge, but the issue has persisted. which of the following should the tech perform NEXT?
A. Replace the imaging drum
B. Realign the pickup rollers
C. Clean the duplexing assembly
D. Calibrate the printer
Replace the imaging drum
documents are not printing out correctly from the laser printer at a conference. some of the print is missing and the pages come out un readable. which of the following should a tech do to fix the issue?
A. Exchange the transfer roller
B. Recalibrate the printer
C. Clear the jam
D. Replace the fuser assembly
Replace the fuser assembly
which of the following cable types is the standard connector on a printer?
A. DVI
B. eSATA
C. USB
D. Lightning
USB
which of the following in the MAXIMUM power PoE+ provides?
A. 15.4W
B. 30W
C. 60W
D. 95W
30W
WiFi mesh network has been optimized to eliminate poor coverage areas, yet the users still experience decreased bandwidth and connectivity issues. which of the following actions should the tech do next?
A. Relocate any large, dense, solid objects in the mesh network
B. Use WiFi analyzer to determine whether the channel in use is overcrowded
C. Use the signal strength on a mobile device to roam the coverage area and generate a heat map to isolate zones with weak signals
D. Turn off broadcasting to the SSID on the mesh network
Use the signal strength on a mobile device to roam the coverage area and generate a heat map to isolate zones with weak signal
a tech configured a new SOHO router for a small business. the ISP gave the tech an IP address on the routers WAN port. which of the following addresses did the tech MOST likely configure on the router?
A. 10.1.50.30
B. 19.45.7.28
C. 169.254.168.10
D. 172.22.40.6
19.45.7.28
which of the following is the PRIMARY security concern with virtual machine escape?
A. Cross-site scripting
B. Compromising the hypervisor
C. Overutilization of resources
D. Rogue virtual machines installed on the hypervisor
Compromising the hypervisor
