PRELIM EXAM Flashcards
What is the code to set the banner Authorize User Login.
BANNER MOTD &Authorize User Login&
POST stands for Answer
POWER-ON SELF TEST
What is the code to erase all the configuration on the router?
ERASE STARTUP-CONFIG
A command used to show status of an interface
SHOW INTERFACES
What is the speed of FastEthernet?
100MBPS
information that can be found on the router start up.
Amount of RAM
Number and Types of Interfaces
Amount of NVRAM
Model and CPU
Bootstrap Version
Amount of Flash Memory
IOS Version
____________ examine a packet’s destination IP address and determine the best path by enlisting the aid of a routing table
ROUTER
Contains the running copy of configuration file. Stores routing table.
RAM
Denotes static routes in the routing table.
S
LAYER 2 IS DATA-LINK LAYER
Layer 2 uses ____________.
MAC ADDRESS
Displays configuration file NVRAM
SHOW STARTUP-CONFIG
Displays abbreviated interface configuration information
SHOW IP INT BRIEF
Speed of Gigabit Ethernet/ GigE
1000MBPS
INTERFACE !!!!!
A command use to enable the interface.
NO SHUT
DTE stands for
DATA TERMINAL EQUIPMENT
Select device under layer 2.
SWITCH, BRIDGE
Holds diagnostic software used when router is powered up. Stores the router’s bootstrap program.
ROM
The speed of the link or data capacity of the link is commonly known as
BANDWIDTH
What is code to save running configuration?
COPY RUN START
OR
COPY RUNNING-CONFIG STARTUP-CONFIG
Memory that contains the operating system
FLASH MEMORY
Where router store the configuration permanently?
NVRAM
Displays configuration, currently in RAM
SHOW RUNNING-CONFIG
A ________ is a network device that is responsible for connecting different networks
ROUTER
LAYER 3: NETWORK LAYER
Layer 3 uses _________________.
IP ADDRESS
