Powerplant And Propeller Airworthiness Inspections Flashcards
What publications can be used as a guide for 100 hour inspections on aircraft engines?
Manufactures maintenance manuals.
FAR part 43, appendix D
How do you identify the engine serial number?
It is on the engine data plate.
Prior to returning a reciprocating engine to service after a 100 hour inspection, what operational checks must be performed?
Power output check.
Magneto check.
Fuel and oil pressure check.
Cylinder and oil temperature check.
Where are life limited parts of an engine listed?
Engine maintenance manuals.
TCDS.
Airworthiness limitations section of instructions for continued airworthiness.
Where can engine operating limits be found?
Engine manual.
Engine specification.
TCDS.
Aircraft manufacturer’s maintenance manual.
Why are hot section inspections performed on turbine engines?
To determine the integrity and wear of the hot section components.
What inspections must be performed following a turbine engine over speed?
Refer to the engine manufacturer’s maintenance manual for the required procedures.
What inspections must be performed on a turbine engine if the exhaust gas temperature exceeds limitations?
A hot section inspection.
What FAA approvals are required when installing an engine that is not on the aircraft type certificate?
STC (supplemental type certificate).
Or FAA field approval.
Under what conditions is compliance with an engine service bulletin mandatory?
When:
Airworthiness directive references the service bulletin.
Compliance is part of the approved operating specifications for a commercial/air carrier operator.
Engine or component overhaul procedures require compliance at time of overhaul.