Performance

Question 1

What is the maximum weight for a reduced thrust takeoff on runway 6L at AA?

Answer 1

50,540 lbs

Question 2

What would your V1, VR, V2 and VFTO speeds for this takeoff?

Answer 2

136/138/144/185

Question 3

What does LT H250 mean?

Answer 3

Single engine departure procedure. Reaching 1000’ left turn heading 250

Question 4

What does C31 mean on that line?

Answer 4

Climb limited V1 of 131

Question 5

What would the weight penalty be for going bleeds open?

Answer 5

460 lbs

Question 6

What does -1 mean on that line?

Answer 6

Subtract 1 from Max V1

Question 7

What is the maximum weight for a normal thrust takeoff on runway 6L at AA flaps 20?

Answer 7

55,110 lbs

Question 8

What is your maximum landing weight on runway 7L dry?

Answer 8

55,110 lbs

Question 9

What does wet rwy-low vis mean?

Answer 9

Does not apply

Question 10

What is your minimum landing distance for a 47,000 lb. landing weight with thrust rev credit and normal vis?

Answer 10

3,982 ft

Question 11

Using the CRJ 200 speed cards, what would your Takeoff N1 /Climb N1 and MCT N1 be for a
bleeds open takeoff at a pressure altitude of 4,000 ft. and -15°C?

Answer 11

87.3/86.4/88.2

Question 12

Using the CRJ 200 speed cards at 52,000 lbs., what is VENR at FL310? When would you use this speed? What is the maximum altitude you could maintain single engine?

Answer 12

210/FL190

Question 13

Using the CRJ 200 speed cards, what is VMRC for a weight of 48,000 lbs. with a 100 kt. tailwind?

Answer 13

231

Question 14

Using the CRJ 200 speed cards, what would the fuel burn be for an unplanned diversion 400
miles away at 47,000 lbs. and no wind?

Answer 14

3,270 lbs

Question 15

Landing runway 09 wind 040 at 25 kts., can the FO land?

Answer 15

Yes, limit is 90 ̊ crosswind component of 20kt. This crosswind component is 19kt. Limitation may be waived when PIC is qualified company check airman