PCAR PART 6

Question 1

What is the title of PCAR Part 6?
a. Personnel Licensing
b. Approved Training Organization
c. Airworthiness
d. Approved Maintenance Organization

Answer 1

d. Approved Maintenance Organization

Question 2

The person signing maintenance release or an approval for return to service shall be qualified in accordance with CAR Part _____?
a. 2
b. 3
c. 5
d. 6

Answer 2

a. 2

Question 3

It describes the ratings (Class and/or Limited) in detail and contains reference material and process specifications used in performing repair work, along with any limitations applied to the maintenance organization.
a. Approved Data
b. Maintenance Release
c. Return to Service
d. Specific Operating Provisions

Answer 3

d. Specific Operating Provisions

Question 4

A certification confirming that the maintenance work to which it relates has been complied with in accordance with the applicable standards of airworthiness, using approved data.
a. Approved Data
b. Maintenance Release
c. Return to Service
d. Specific Operating Provisions

Answer 4

b. Maintenance Release

Question 5

A document signed by an authorized representative of an AMO in respect of an inspection, repair, or modification on a complete aircraft, engine, or propeller.
a. Approved Data
b. Maintenance Release
c. Return to Service
d. Specific Operating Provisions

Answer 5

c. Return to Service

Question 6

Technical information approved by the Authority.
a. Approved Data
b. Maintenance Release
c. Return to Service
d. Specific Operating Provisions

Answer 6

a. Approved Data

Question 7

What is the minimum rest period of a person who will perform maintenance function?
a. 8
b. 10
c. 12
d. 16
e. 20
f. 24

Answer 7

a. 8

Question 8

What is the maximum number of consecutive hours allowed to a person performing maintenance function?
a. 8
b. 10
c. 12
d. 16
e. 20
f. 24

Answer 8

c. 12

Question 9

A person performing maintenance functions is limited only to _____ consecutive hours of duty.
a. 8
b. 10
c. 12
d. 16
e. 20

Answer 9

c. 12

Question 10

In situations involving unscheduled aircraft unserviceability, persons performing maintenance functions for aircraft may be continued on duty for up to _____ consecutive hours.
a. 8
b. 10
c. 12
d. 16
e. 20
f. 24

Answer 10

e. 20

Question 11

Following unscheduled duty periods, the person performing maintenance functions for aircraft shall have a mandatory rest period of _____ hours.
a. 8
b. 10
c. 12
d. 16
e. 20
f. 24

Answer 11

b. 10

Question 12

How long (in hours) should the person performing maintenance functions be relieved from all duties during any 7 consecutive day period?
a. 8
b. 10
c. 12
d. 16
e. 20
f. 24

Answer 12

f. 24

Question 13

Which Part of the Philippine Civil Aviation Regulation prescribes the
requirements for issuing approvals to organizations for the maintenance, preventive maintenance, and modifications of aircraft and aeronautical products?
a. 2
b. 3
c. 5
d. 6

Answer 13

d. 6

Question 14

Structural material made of wood, metal, ceramic plastic, fiber-reinforced materials, graphite, boron, or epoxy with built-in strengthening agents that may be in the form of filaments, foils, powders, or flakes is called a/an _____.

a. article
b. composite
c. facility
d. housing

Answer 14

b. composite

Question 15

It can be item such as an aircraft, airframe, aircraft engine, propeller,
appliance, accessory, assembly, subassembly, system, subsystem, component, unit, product, or part.

a. Article
b. Composite
c. Facility
d. Housing

Answer 15

a. Article

Question 16

It is defined as a physical plant, including land, buildings, and equipment, which provide the means for the performance of maintenance, preventive maintenance, or modifications of any article.

a. Article
b. Composite
c. Facility
d. Housing

Answer 16

c. Facility

Question 17

According to PCAR Part 6, which is not a housing?
a. Building
b. Hangar

c. Working space for the performance of maintenance, preventive maintenance, or modifications for which the maintenance organization is certificated and rated

d. Structures for the proper protection of aircraft, airframes, aircraft
engines, propellers, appliances, components, parts, and subassemblies thereof during disassembly, cleaning, inspection, repair, modification, assembly, and testing

e. Structures for proper storage, segregation, and protection of materials, parts, and supplies

Answer 17

Idk the answer search for it

Question 18

The AMO certificate consists of two documents? Which among these documents is part of the AMO certificate?

a. Approved Data
b. Maintenance Release
c. Return to Service
d. Specific Operating Provisions

Answer 18

d. Specific Operating Provisions

Question 19

Who signed the AMO certificate?

a. Accountable manager
b. Authority
c. Accountable manager and Authority
d. CAB Executive Director

Answer 19

b. Authority

Question 20

Who signed the Specific Operating Provisions?

a. Accountable manager
b. Authority
c. Accountable manager and Authority
d. CAB Executive Director

Answer 20

c. Accountable manager and Authority

Question 21

A request for deviation authority must be submitted to the Authority at least _____ days before the date the deviation from specified sections in this part is necessary for the intended maintenance, preventive maintenance, or modification.

a. three (3)
b. ten(10)
c. thirty (30)
d. sixty(60)

Answer 21

d. sixty(60)

Question 22

Which among the following options about the effectivity of certificate/rating issued to an AMO not located in the Philippines is not true?

a. From the date of issue until the Authority suspends it.
b. From the date of issue until he Authority revokes it.
c. From the date of issue until the last day of the 12th month.
d. From the date of issue until the approved maintenance organization surrenders it.
e. None of the abov

Answer 22

d. From the date of issue until the approved maintenance organization surrenders it.

Question 23

Which among the following options about the effectivity of certificate/rating issued to an AMO located in the Philippines is not true?
a. From the date of issue until the Authority suspends it.
b. From the date of issue until he Authority revokes it.
c. From the date of issue until the last day of the 12th month.
d. From the date of issue until the approved maintenance organizationsurrenders it.
e. None of the above.

Answer 23

c. From the date of issue until the last day of the 12th month.

Question 24

An AMO located outside the Philippines should submit their request for the renewal of certificate _____ days before its expiration.

a. three (3)
b. ten(10)
c. thirty (30)
d. sixty(60)

Answer 24

d. sixty(60)

Question 25

A change in which of the following will result to a new certificate number? a. Location of organization b. Additional location c. Housing, facilities, equipment, tools, material, procedures, work scope, and certifying staff d. Ratings e. Name of organization f. Ownership g. Accountable manager h. List of management personnel

Answer 25

f. Ownership

Question 26

How many AMO ratings are there? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 26

d. Seven (7)

Question 27

How many classes are there under airframe rating? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 27

d. Seven (7)

Question 28

How many classes are there under computer systems rating? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 28

b. Three (3)

Question 29

How many classes are there under propeller rating? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 29

a. Two (2)

Question 30

How many classes are there under avionics rating? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 30

b. Three (3)

Question 31

How many classes are there under accessory rating? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 31

c. Four (4)

Question 32

How many classes are there under powerplant rating? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 32

b. Three (3)

Question 33

Maintenance, preventive maintenance, or modifications on reciprocating engines fall under what class? a. Class 1 b. Class 2 c. Class 3 d. Class 4

Answer 33

a. Class 1

Question 34

How many classes are there under instrument rating? a. Two (2) b. Three (3) c. Four (4) d. Seven (7)

Answer 34

c. Four (4)

Question 35

Per PCAR Part 6, the maintenance, preventive maintenance, or modifications of _____ fall under class 2 of the powerplant rating. a. reciprocating engines b. rockets c. turbopropeller and turboshaft engines d. turbofan and turbojet engines

Answer 35

c. turbopropeller and turboshaft engines

Question 36

Tubofan and turbojet engines fall under class _____ of the powerplant rating. a. 1 b. 2 c. 3 d. 4

Answer 36

c. 3

Question 37

Under what class of propeller rating do the maintenance, preventive maintenance, or modifications of fixed-pitch propellers fall? a. 1 b. 2 c. 3 d. 4

Answer 37

a. 1

Question 38

Ground-adjustable propellers fall under class _____ of propeller rating. a. 1 b. 2 c. 3 d. 4

Answer 38

a. 1

Question 39

The second class of the propeller rating is concern about the maintenance, preventive maintenance, and modifications of _____. a. all kinds of propeller b. fixed-pitch propellers c. ground-adjustable propellers d. variable-pitch propellers

Answer 39

d. variable-pitch propellers

Question 40

Which of these statements regarding avionics rating is true? a. Avionics rating has three (3) classes like the computer system rating. b. Class 1 deals with any radio transmitting equipment or receiving equipment, or both, used in aircraft to send or receive communications, regardless of carrier frequency or type of modulation used c. Class 2 is for any avionics system used in aircraft for en-route or approach navigation. d. Any aircraft electronic system operated on pulsed radio frequency principles falls under class.

Answer 40

all of it

Question 41

The computer systems’ ratings have three classes, namely _____. a. 1-aircraft; 2-powerplant; 3-avionics b. 1-aircraft; 2-avionics; 3-powerplant c. 1-avionics; 2-powerplant; 3-aircraft d. 1-avionics; 2-aircraft; 3-powerplant e. 1-powerplant; 2-avionics; 3-aircraft f. 1-powerplant; 2-aircraft; 3-avionics

Answer 41

a. 1-aircraft; 2-powerplant; 3-avionics

Question 42

Which of these statements regarding accessory rating is not true (2)? a. Accessories that depend on friction, hydraulics, mechanical linkage, or pneumatic pressure for operation fall under class 1 (mechanical). b. Auxiliary power units are under class 4 (APU). c. Accessories that depend on electrical energy fall under class 2 (electronic). d. The number of classes on the accessory rating is the same as the number of classes in the instrument rating. e. Class 3 (electrical) includes accessories that depend on the use of electron tube transistors, lasers, fiber optics, solid-state, integrated circuits, vacuum tubes, or similar electronic controls.

Answer 42

c. Accessories that depend on electrical energy fall under class 2 (electronic). e. Class 3 (electrical) includes accessories that depend on the use of electron tube transistors, lasers, fiber optics, solid-state, integrated circuits, vacuum tubes, or similar electronic controls.

Question 43

Instrument rating, class 1 covers the maintenance, preventive maintenance, or modifications on _____. a. any diaphragm, bourdon tube, aneroid, optical, or mechanically driven centrifugal instrument that is used on aircraft or to operate aircraft, including tachometers, airspeed indicators, pressure gauges, drift sights, magnetic compasses, altimeters. or similar mechanical instruments b. any self-synchronous and electrical indicating instruments and systems, including remote indicating instruments, cylinder head temperature gauges, or similar electrical instruments c. any instrument or system using gyroscopic principles and motivated by air pressure or electrical energy, including automatic pilot control units, turn and bank indicators, directional gyros, and their parts, and flux gate and gyrosyn compasses d. any instruments whose operation depends on electron tubes, transistors, or similar devices including capacitance type quantity gauges, system amplifiers, and engine analyzers

Answer 43

a. any diaphragm, bourdon tube, aneroid, optical, or mechanically driven centrifugal instrument that is used on aircraft or to operate aircraft, including tachometers, airspeed indicators, pressure gauges, drift sights, magnetic compasses, altimeters. or similar mechanical instruments

Question 44

The AMO shall retain the capability list(s) and self-evaluation(s) for _____ year/s from the date accepted by the Accountable Manager. a. one b. two c. five d. ten

Answer 44

b. two

Question 45

A/an _____ shall be issued by appropriately authorized certifying staff when all required maintenance of the aircraft or aeronautical product has been properly carried out by the AMO. a. AMO Certificate b. RTS Certificate c. Maintenance Release d. Maintenance Procedures Manual

Answer 45

b. RTS Certificate

Question 46

It specifies the scope of work required of the AMO in order to satisfy the relevant requirements needed for an approval of an aircraft or aeronautical product for return to service. a. AMO Certificate b. RTS Certificate c. Maintenance Release d. Maintenance Procedures Manual

Answer 46

d. Maintenance Procedures Manual

Question 47

Which among the following should be seen in a Certificate of RTS? a. Basic details of the maintenance carried out b. Date such maintenance was started c. Date such maintenance was completed d. Identity, including the authorization reference, of the AMO and certifying staff issuing the certificate e. All of the above

Answer 47

b. Date such maintenance was started

Question 48

The AMO shall retain a copy of all detailed maintenance records and any associated airworthiness data for _____ year/s from the date the aircraft or aeronautical product to which the work relates was released from the AMO. a. one b. two c. five d. ten

Answer 48

b. two

Question 49

Each person who maintains, performs preventive maintenance, rebuilds, or modifies an aircraft/aeronautical product shall make an entry in the maintenance record. Which is not seen in a maintenance record? a. Description of work performed b. Date the work was started c. Date of completion of the work performed d. Name of the person performing the work e. Signature, certificate number, and kind of certificate held by the person approving the work f. Authorized signature, the AMO certificate number, and kind of certificate held by the person approving/disapproving RTS

Answer 49

c. Date of completion of the work performed

Question 50

Who shall make an entry in the maintenance record after performing an inspection? a. Owner b. Operator c. Person approving/disapproving for RTS d. Pilot

Answer 50

c. Person approving/disapproving for RTS

Question 51

51. What should not be seen in the maintenance record entry after an inspected aircraft product was proven to be airworthy? a. Type of inspection and brief description of the extent of the inspection b. Date of the inspection and aircraft total time in service c. Authorized signature, the AMO certificate number, and kind of certificate held by the person approving or disapproving for return to service d. “I certify that this aircraft has been inspected in accordance with (insert type) inspection and was determined to be in airworthy condition.” e. “I certify that this aircraft has been inspected in accordance with (insert type) inspection and a list of discrepancies and unairworthy items dated (date) has been provided for the aircraft owner or operator.”

Answer 51

e. “I certify that this aircraft has been inspected in accordance with (insert type) inspection and a list of discrepancies and unairworthy items dated (date) has been provided for the aircraft owner or operator.”

Question 52

Who shall be responsible in ensuring that all necessary resources are available to accomplish maintenance required to support the AMO's approval? a. Accountable Manager b. Base Maintenance Manager c. Line Maintenance Manager d. Workshop Manager e. Quality Manager

Answer 52

a. Accountable Manager

Question 53

Who shall be responsible in ensuring that all work on aircraft components is performed to required standards? a. Accountable Manager b. Base Maintenance Manager c. Line Maintenance Manager d. Workshop Manager e. Quality Manager

Answer 53

d. Workshop Manager

Question 54

Who shall be responsible in ensuring that all maintenance required to be carried out in the hangar, plus any defect rectification carried out during base maintenance, is carried out to specified design and quality standards? a. Accountable Manager b. Base Maintenance Manager c. Line Maintenance Manager d. Workshop Manager e. Quality Manager

Answer 54

b. Base Maintenance Manager

Question 55

Who shall be responsible in monitoring the AMO's compliance with Part 6? a. Accountable Manager b. Base Maintenance Manager c. Line Maintenance Manager d. Workshop Manager e. Quality Manager

Answer 55

e. Quality Manager

Question 56

Who shall be responsible in monitoring the amendment of the Procedures Manual? a. Accountable Manager b. Base Maintenance Manager c. Line Maintenance Manager d. Workshop Manager e. Quality Manager

Answer 56

e. Quality Manager

Question 57

Who shall be responsible in ensuring that all maintenance required to be carried out on the line, including line defect rectification, is performed to the required standard? a. Accountable Manager b. Base Maintenance Manager c. Line Maintenance Manager d. Workshop Manager e. Quality Manager

Answer 57

c. Line Maintenance Manager

Question 58

Who should carry out maintenance tasks to any standard specified in the maintenance instructions? a. Certifying staff b. Mechanics c. Planners d. Supervisors

Answer 58

b. Mechanics

Question 59

Who should notify supervisors of mistakes requiring rectification to re-establish required maintenance standards? a. Certifying staff b. Mechanics c. Planners d. Supervisors

Answer 59

b. Mechanics

Question 60

Who should determine if the aircraft/aircraft component is ready or not to return to service? a. Certifying staff b. Mechanics c. Planners d. Supervisors

Answer 60

a. Certifying staff

Question 61

Who should ensure that all required maintenance tasks are carried out? a. Certifying staff b. Mechanics c. Planners d. Supervisors

Answer 61

d. Supervisors

Question 62

Who should interpret maintenance requirements into maintenance tasks? a. Certifying staff b. Mechanics c. Planners d. Supervisors

Answer 62

c. Planners

Question 63

The AMO shall keep the record of a certifying person for at least _____ year/s after that person has ceased employment with the AMO or upon withdrawal of his or her authorization. a. one b. two c. five d. ten

Answer 63

b. two

Question 64

When is the RTS certificate not required? a. Before flight at the completion of any package of maintenance scheduled by the approved aircraft maintenance program on the aircraft, whether such maintenance took place as base or line maintenance b. Before flight at the completion of any defect rectification, while the aircraft operates between scheduled maintenance c. At the completion of any maintenance on an aircraft component when off the aircraft d. None of the above

Answer 64

d. None of the above

Question 65

Records are maintained in active file for _____ years then transferred to dead storage for _____ additional years. a. 2;5 b. 2;2 c. 5;2 d. 5;5

Answer 65

a. 2;5

Question 66

All 100-hour and annual inspection paperwork will comply with PCAR Part _____. a. 2 b. 3 c. 5 d. 6

Answer 66

c. 5

Question 67

Who is/are responsible for preparing and submitting a Malfunction or Defect Report to the CAA Office? a. Accountable Manager b. Chief Certifying Staff Manager c. Quality Manger d. Accountable Manager and Chief Certifying Staff Manager

Answer 67

d. Accountable Manager and Chief Certifying Staff Manager

Question 68

Who is responsible for the final disposition of rejected part including components of parts that have exceeded allowable shelf life limits? a. Accountable Manager b. Chief Certifying Staff Manager c. Quality Manger d. Accountable Manager and Chief Certifying Staff Manager

Answer 68

b. Chief Certifying Staff Manager

Question 69

Which CAR Part provides regulations for the registration and monitoring of Approved Maintenance Organizations (AMO) in Republic of the Philippines? a. 2 b. 3 c. 5 d. 6

Answer 69

d. 6