Part 3 Ch. 7-9 Fire Apparatus and Pumps Flashcards
1
Q
Water Tender
Weight capacity on axles
A
- NFPA to be considered tanker must 1,000 Gallon tank and minimum 10 cubic feet space
- If equipped with pump must have same capacity of fire pumps and carry 15’ supply hose or 20’ hard intake with strainer + minim 100ft 1 ½ -2” hose and a 1 combo nozzle 95gpm
- T-Shaped tanks on single axle 1500 gal
- Single rear axle limited to 2,000 gall
- Double rear axle limited to 4,000 gall
- If want to transport more than 4,000 gall of water on a single truck need tractor/trailer
- Pumper-Tankers (tankers with pumps carry as much as 3,000 gall) dis-advantage is they’re slower to respond due to sheer size
2
Q
NFPA required hydrostatic test
A
Pump tested to 250psi for 3 minutes with discharges open and capped
3
Q
If Driver unsure to use Pressure or Volume mode default to…
A
Volume mode because it can supply 100% of pump capacity at 150psi
4
Q
When performing changover, recommended max PSI for standard and Power Operated changeover/transfer valve
A
- Standard: 75 psi
- Power Operated: 200 psi
-can present huge danger to truck and people on line. Operate with care
5
Q
Power operated changeover/transfer valves
A
- can do so during pressure as high as 200psi which can present huge danger to truck and people on line. Operate with care
6
Q
Pumping Test
A
- *3 hrs long for trucks 750gpm or higher
- 100% Pump rated capacity at 150psi for 2 hours
- 70% Pump rated capacity at 200psi for ½ Hour
- 50% Pump rated capacity at 250psi for ½ Hour
- Pump must not be stopped for 2hr portion unless to clean strainer, pump may be stopped between 3 portions of test (fuel,strainer,nozzles,etc)
- Volume, Intake/Discharge Pressures, and RPM recorded every 15 minutes*
7
Q
Pumping Overload Test
A
- Only trucks greater than 750gpm
- NFPA requires test perform immediately after 2hr test
- Require to flow 100% rated capacity at 165psi for at least 10 minutes
- Results recorded at least 3 times
8
Q
Pressure Control System Test
A
Ensures Pressure Relief Devices work reducing the dangers of overpressurization
9
Q
A