Outside Op General

Question 1

Amine

Swapping pumps get online quickly and offgoing quickly especially the s__ pumps. Pumps cannot stay on together to l__.

solution pumps do not need to be p__

glycol pumps are bumped to w__ s__

glycol pumps stay on h__ to operate

Answer 1

Amine

Swapping pumps get online quickly and offgoing quickly especially the solution pumps they can stay on together to long

solution pumps do not need to be primed

glycol pumps are bumped to warm seal

glycol pumps stay on hand to operate

Question 2

all plant p__ and c__ need to be vented prior to starting because this is what happened

Answer 2

all plant pumps and compressors need to be vented prior to starting because this is what happened

Question 3

Inlet compressors it takes _ _ - _ _ minutes to come online so when swapping them do not turn off off going until on___ is online and you’re told by control

Inlet compressor lub oil pumps _ green lights = ^ unit compressor

inlet compressor/residue compressor = 2 spill back on h__ and res vfd= a__ a__ and res discharge compressor= h__ always while on

inlet compressor/residue off line = all switches on ___

Answer 3

Inlet compressors it takes 10-13 minutes to come online so when swapping them do not turn off off going until oncoming is online and you’re told by control

Inlet compressor lub oil pumps 2 green lights = ^ unit compressor

inlet compressor/residue compressor = 2 spill back on hand and res vfd= always auto and res discharge compressor= hand always while on

inlet compressor/residue off line = all switches on AUTO

Question 4

Helium compressor must come d__ all the way down when swapping them (its one unit)

Answer 4

Helium compressor must come DOWN all the way down when swapping them (its one unit)

Question 5

air compressors system operate at _ _ _P system wide and plant shut down = _ _P

air compressors should swap automatically if they dont you simply f__ the switch

when air compressors go down you must r__ and ensure that they swap if you get there and they havent you must turn on s__.

air compressors you add oil right by the level gage you must take pressure gage off next to it and line must be isolated because it is p__.

air compressor oil limit= fill the _

air compressor Left side low = L__ right side low= f__

Answer 5

air compressors system operate at 125P system wide and plant shut down = 80P

air compressors should swap automatically if they dont you simply flip the switch

when air compressors go down you must run and ensure that they swap if you get there and they havent you must turn on sullair.

air compressors you add oil right by level gage you must take pressure gage off next to it but line must be isolated because it is pressurized.

air compressor oil limit= fill the U

air compressor Left side low = low right side low= full

Question 6

Applies to all equipment:

Startup alignment

1 walk ___ alignment

2 v__

3 ack/reset on p__and s__

Securing

1 turn o__ equipment

2 secure by walking flow b__

Answer 6

Applies to all equipment:

Startup alignment

1 walk flow alignment

2 vent

3 ack/reset on panel and screen

Securing

1 turn off equipment

2 secure by walking flow backwards