Oral Prep - Side Panels Flashcards
What precaution must be taken before turning the NWS switch ON during the After Start Check?
The After Start Flow may be initiated once the engine(s) have stabilized; however, do not complete the flight control, rudder check or engage nosewheel steering until the tug or tow bar has been disconnected, flaps are set to planned takeoff setting, and the area is clear of personnel.
If one of the STALL PTCT PUSHER switches is selected OFF will the stall pusher be operational?
No
How can the stick pusher be stopped?
By pressing and holding the AP/SP DISC switch on the pilot or copilot control wheel, or by selecting either of the STALL PTCT PUSHER switches OFF.
May you depart with one of the STALL PTCT PUSHER switches off?
No
Can cross side NAV data be displayed on the PFD and MFD?
Yes, by rotating the NAV SOURCE knob on the DCP.
How is TCAS information displayed on the MFD?
Press the TFC switch on the DCP.
How is EGPWS terrain information displayed on the MFD?
Automatically if encountered, or overlaid if selected
How is the EGPWS display removed from the MFD?
Pushing the TERR/WX pushbutton on the DCP.
When the RA TEST button is pressed, what should the radar altitude read?
50 Feet
What is the function of the EICAS position on the Display Reversionary Panel?
To display ED2 information on the MFD.
What does the response “Ckd/Set” in reference to Side Panel… on the First Flight Check indicate?
Refer to Amplified Procedures section of CR2 OM for Side Panels for this answer.
When are you required to complete the First Flight Check?
When you are flying the assigned aircraft for its first flight of the day, not the crews first flight
To what figure should the MDA be set with a DA of 512 feet on a precision approach?
520 feet. MDAs are in 10-foot increments.
