OM B DAT

Question 1

Stabilized criteria

Answer 1

Question 2

NADP 1

Answer 2

Close in noise sensitivty

800/3000 AAL

Above 3000 aal accelerator smoothly and clean up

Question 3

NADP 2

Answer 3

Distante noise sensitivity

800/3000 AAL

800
- thrust reduktion
- pos rate
- accellerate to green dot
- clean up

3000
- accelerate to enroute climb speed

Question 4

ECAM PROCEDURES
sequence

Answer 4

Follow the overhead sequence

PM should call AIR, CROSS BLEED, CLOSE,

Question 5

ECAM failure confirmation

Answer 5

PM
ANNONCE TITLE OFF FAILURE

ANALYSE

ANNOUNC ECAM CONFIRMED

Question 6

ECAM WITH OEB

Answer 6

Ecam actions
PM. OEB APPLIES and deal with OEB.
PM. Clear
PF CLEAR.
PM. Status
PF. Stop ECAM. Paper checklist. Computer reset.

Question 7

When to Press APPR button?

Answer 7

Flying ILS
- when cleared for app
- on intercept for final course
- LOC DV is availible. This arm LOC and GS modes.

ICAO defines
ILS signal normal capture
10 nm.
+- 8 degrees,
up to 1,75 and
Down to 0,3.

Question 8

During ILS when to engage both AP?

Answer 8

Right after selection APPR

Question 9

Flight parameters callouts during approach

Answer 9

Speed! -5 and +10
Sink rate! Rod more than 1000 ft
Bank! More than 7 degree
Pitch! -2,5 and +10
LOC! Or glide! 1/2 dot
Crosstrack! More than 0.1nm
Vdev! 1/2 dot

Question 10

ECAM actions completed then…?

Answer 10

Dodar, start with fuel