NIR Handheld Camera Flashcards
What laparoscopes are used with the camera?
used with 5&10mm laparoscopes
Can I use flourescence
it is supported with the 10mm scopes
Where can I plug in the CCU and light source?
outlets separate from those of the tower, robot, and console dedicated outlets
What does CCU stand for
Camera Control Unit
What are the parts of the CCU
Camera head connection socket
ON/standby button
Navigate up button
open menu/ enter button
navigate down
What are the buttons/parts on the light source
Laser emission indicator
light guide connector
on/standby button
display
light intensity adjustment
What is the silver ring on the camera
Focus ringW
What is the black ring used for?
Zoom
What are the 3 buttons on the camera?
Green: up button
White: down button
Grey: menu button
Short press / long press for up button
short: cycle through imaging modes
long: light source on/standby
short/ long press for down button
short: navigate down
long: white balance
short/ long press for menu button
short: confirm selection
long: open/exit menu
How do you turn on the system
- Connect each component to power
- The CCU will connect to the light source via the MIS-bus cable
- The CCU will connect to the tower via the DVI to HDMI cable
- Ensure that the main power switch on the backside of each component is in the ON position
Camera assembly steps
- screw the light guide adapter onto the light guide connector
- Rotate silver ring to align the hashmark with the unlock button
- Press the eyepiece locking mechanism together to spread apart
- Insert eyepiece end of scope and release the locking mechanism
- rotate the silver ring to aligh hashmark with lock
- screw light guide adapter onto the ligh guide
