NAV and ATC Flashcards
For a LAHSO the minimum ceiling needs to be __________ and minimum visibility is ____________.
1500’ and 5SM OR 1000’ and 3SM with PAPI/VASI
LAHSO runways should be considered
Dry if operations are in effect
Tailwind on the LAHSO runway must be calm, less than ________ knots.
3
A _________________ approach is required for a LAHSO runway.
Stabilized
LAHSO Minimum runway length for CRJ 700? 900?
6000 ft, 7000 ft (add 100 feet for each 1000’ above 1000 MSL airport elevelation) Example: Airport elevation 1550 = 6100’ CRJ 700 and 7100 CRJ 900
When in RVSM airspace what are the recommended operating practices for climb and descent rates?
Climb and descent rates are limited to 1000 fpm when operating within 5 nm and + 2000 ft of other aircraft
What equipment is required for RVSM?
Autopilot, Altitude alerting system, 1 of 2 altitude reporting transponders, both air data computers
What is the requirement for reported ceiling and visibility for a circling approach?
1000’/3SM or reported weather at or above charted circling landing minimums, whichever is HIGHER
Which crewmember should have out their Low Visibility Chart (SMGS) if the visibility is less than 1200 RVR?
Both
When are SMGS procedures activated at authorized airports?
Ceiling and visibility conditions indicated visibility less than RVR 1200
.How low of an RVR does Endeavor operate at?
600 RVR
What are Endeavors Standard Takeoff Minimums?
1 mile or RVR 5000 unless higher minimum is specified for a particular airport
For operations at or above RVR 1600 the _____ RVR report if available is controlling.
TDZ RVR
The _____ RVR report may be substituted for an unavailable TDZ report.
Midpoint
For operations below RVR 1600 a minimum of ______ operative RVR systems are required, and ______ available RVR reports are ________________.
Two RVRS, All controlling.
