MQF 2023, Part 2/2 Flashcards
101) What Coordinated Attack type will be separated by time or visual cues?
A. Simultaneous
B. Sequential
C. Combined
D. Sectored
B. Sequential
102) This net provides an emergency distress net for aircraft. It further serves as a means for air control agencies to advise aircraft of emergency conditions or serious hazards to flight safety.
A. Tactical Air Direction Net
B. In-flight Emergency Net
C. Guard Net
D. Air Force Air Request Net
C. Guard Net
103) _____ attacks include multiple flights of aircraft using either combined or sectored tactics in conjunction with some type of deconfliction measure. The JTAC/FAC(A) must approve use of _____ attacks.
A. Integrated
B. Coordinated
C. Air to ground
D. Mixed
B. Coordinated
104) The is a line established between converging friendly forces – one or both may be moving – that prohibits joint fires or the effects of joint fires across the line without coordination with the affected force.
A. RFL
B. FFA
C. ACA
D. BCL
A. RFL
105) _____ are measures employed to facilitate the efficient use of airspace to accomplish missions and simultaneously provide safeguards for friendly forces.
A. Airspace Coordinating Measures
B. Coordinated Fire Line
C. Free Fire Area
D. Procedural Control Measures
A. Airspace Coordinating Measures
106) Who establishes Formal ACAs?
A. The airspace control authority establishes formal ACAs at the request of the appropriate commander.
B. The Wing Operations Center establishes formal ACAs at the request of the appropriate commander.
C. The JTAC establishes formal ACAs at any given time during the mission.
D. The Joint Force Air Component Commander establishes formal ACAs.
A. The airspace control authority establishes formal ACAs at the request of the appropriate commander.
107) The purpose of the _____ is to prevent fratricide and duplication of engagements by converging friendly forces.
A. Restricted Fire Area (RFA)
B. Restrictive Fire Line (RFL)
C. No fire Area (NFA)
D. Coordinated Fire Line (CFL)
B. Restrictive Fire Line (RFL)
108) What is an Air Tasking Order (ATO)?
A. The ATO contains the JFACC’s plan for providing the air support required in the OPLAN/OPORD.
B. The ATO contains the JFC plan for providing the air support required in the OPLAN/OPORD.
C. The ATO contains the WOC plan for providing the air support required in the OPLAN/OPORD.
D. The ATO contains the GFC plan for providing the air support required in the OPLAN/OPORD.
A. The ATO contains the JFACC’s plan for providing the air support required in the OPLAN/OPORD.
109) Target Location Error (TLE) Category 4 is:
A. 0-20 feet / 0-6 meters
B. 21-50 feet / 7-15 meters
C. 51-100 feet / 16-30 meters
D. 101-300 feet / 31-91 meters
D. 101-300 feet / 31-91 meters
110) Target coordinates with a TLE90 (CE) of 5 meters means that there is a ___% chance that the coordinates are within _____ meters of the actual target in the horizontal plane.
A. 50 / 5
B. 90 / 0-6
C. 50 / 0-6
D. 90 / 5
D. 90 / 5
111) General Brevity Terms: LOWDOWN
A. A request for the tactical ground picture in an area of interest.
B. Stop laser illumination of target.
C. Laser designator system is inoperative.
D. Laser energy has not been acquired.
A. A request for the tactical ground picture in an area of interest.
112) Marking Brevity Terms: CAPTURED
A. No visual contact with FRIENDLY aircraft, ground position, or ship.
B. Sighting of FRIENDLY aircraft, ground position, or ship
C. Specified surface target or object has been acquired and is being tracked with an onboard sensor.
D. Acknowledges the sighting of a specified reference point (either visual or via sensor).
C. Specified surface target or object has been acquired and is being tracked with an onboard sensor.
113) Laser Brevity Terms: SPOT
A. Acquisition of laser designation.
B. Laser designator system is inoperative
C. Start/acknowledge laser designation
D. Acquisition of SPARKLE.
A. Acquisition of laser designation.
114) Night IR Brevity Terms: MATCH SPARKLE
A. Circling an IR pointer around an aircraft to help the aircraft identify the friendly ground position.
B. JTAC stops the beam. This can aid in verifying that the aircrew is looking at the proper IR pointer,
especially if followed with another “Sparkle” call.
C. Overlay requested target designator type. Directive term for a second party to overlay an IR mark on an existing mark.
D. JTAC steadies the beam after a “Snake” or “Pulse” call. This can aid in verifying that the aircrew is
looking at the proper IR pointer.
C. Overlay requested target designator type. Directive term for a second party to overlay an IR mark on an existing mark.
115) Video Downlink (VDL) Brevity Terms: CHECK CAPTURE
A. Follow indicated target.
B. Sensor image appears to be out of focus.
C. A full motion video system mark has been set and is used as a frame of reference
D. Target appears to be no longer tracked by sensor.
D. Target appears to be no longer tracked by sensor.
116) Sensor Tasking Brevity Terms: SLANT
A. Refers to the number of people or objects noted at a specific location.
B. A ground borne object of interest departing an objective area.
C. The difference in elevation from the JTAC to his intended target.
D. None of the above.
A. Refers to the number of people or objects noted at a specific location.
117) Electronic Warfare Brevity Terms: MUSIC
A. Use electronic jamming on the indicated radar frequency.
B. Radar electronic deceptive jamming.
C. Directive call to initiate jamming.
D. All of the above
B. Radar electronic deceptive jamming.
118) CAS Mission Planning: Who knows the ACAs, coordinating altitudes, MRRs, ROZs, Attack RW assets, SUAS procedures and deconfliction, assault zones and lift assets?
A. CJSOTF/CC
B. INTEL / S-2
C. Aviation LNO / S-3
D. JTAC / FSO
C. Aviation LNO / S-3
119) CAS Mission Planning: CAS can support what kind of operations?
A. Shaping
B. Close
C. Joint Security Area
D. All of the above
D. All of the above
120) The acronym TEFACHR used for situation updates stands for:
A. Target, enemy situation, fires, armor, control, ordnance, and restrictions.
B. Threats, enemy situation, friendly forces, artillery, clearance authority, hazards and remarks and restrictions.
C. Target and threats, friendly situation, artillery, control, ordnance, and remarks.
D. None of the above
B. Threats, enemy situation, friendly forces, artillery, clearance authority, hazards and remarks and restrictions.
121) In the ordnance portion of the CAS A/C Check In, the JTAC should ask for _____ if not stated by the aircrew.
A. Laser codes for LGBs
B. Bomb fusing options
C. Model of ordnance
D. All of the above
D. All of the above
122) IPs normally should be at least nautical miles from their target?
A. 3-15
B. 10-20
C. 5-15
D. 5-20
C. 5-15
123) Define a Time on Target (TOT)
A. Establishes how long aircraft are exposed/flying in target area.
B. Establishes a precise number of minutes and seconds that elapse between an established time hack and
ordnance effects.
C. Establishes what time aircraft enter and leave target area.
D. Is a time at which the aircraft bombs are to impact the target and around which supporting surface fires can be coordinated.
D. Is a time at which the aircraft bombs are to impact the target and around which supporting surface fires can be coordinated.
124) The most important ADVANTAGE of night and adverse weather CAS is
A. the element of surprise
B. The limitation it imposes on enemy optically-directed AAA and optical/IR guided SAMs
C. Aircraft require a longer time on station; increasing the number of target attacks
D. JTAC observation point is concealed from direct enemy observation; enhancing CAS effectiveness
B. The limitation it imposes on enemy optically-directed AAA and optical/IR guided SAMs
125) Correlation is the process by which the JTAC coordinates and confirms that the attacking aircrew have acquired the correct target or mark. Correlation is required on each and every CAS attack. T/F
A. True
B. False
A. True
126) When using IR pointers or laser to mark, include IR POINTER or LASER in the marks portion of the CAS briefing.
A. TRUE
B. FALSE
A. True
127) The _____ is a single mode JDAM LCDB with a BLU-129 carbon fiber bomb body.
A. GBU-54v4
B. GBU-38v4
C. GBU-54v5
D. GBU-38v5
D. GBU-38v5
128) What is DANGER CLOSE (0.1% PI) for the AGM-114R?
A. 100 meters
B. 130 meters
C. 150 meters
D. 175 meters
B. 130 meters
129) What is DANGER CLOSE (0.1% PI) for the GBU-38v4 contact (airburst)?
A. 340 (390) meters
B. 185 (230) meters
C. 270 (350) meters
D. 140 (195) meters
B. 185 (230) meters
130) The JTAC/FAC(A) will confirm the laser code prior to CAS execution. The LTL should be passed during the _____.
A. Fighter Check-In
B. AO Update
C. Remarks
D. BDA
C. Remarks
131) _____ is the result of motion of the laser designator around the intended aim point.
A. Ocular motion
B. Spot jitter
C. Loose laser
D. No spot
B. Spot jitter
132) Because aviation NVGs will not detect certain colors, only _____ and _____ should be used when making a buzz saw or inverted Y with chem-lights.
A. Red / Blue
B. Red / Green
C. Red / IR
D. Green / IR
C. Red / IR