Module 4 EM Spectrum, diffraction, polarisation Flashcards
EM - What is the electromagnetic spectrum?
in physics, electromagnetic radiation consists of waves of the electromagnetic field, which propagate through space and carry electromagnetic radiant energy.
It includes radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays . All of these waves form part of the electromagnetic spectrum.
EM - What defines electromagnetic waves
can travel in a vacuum, travel at the speed of light in a vacuum
EM - What type of waves are in the EM spectrum?
Transverse waves, progressive therefore transferring energy
EM - Name the EM waves in order of decreasing wavelength
radio
microwaves
infrared
visible
ultraviolet
x-ray
gamma
EM - EM spectrum in order of decreasing frequency
gamma
x-ray
ultraviolet
visible
infrared
micro
radio
EM - Typical wavelength for visible light
700-400nm red to blue (7-4x10^-7m)
EM - Typical wavelength for gamma rays
10^-10 to 10^-16 (typical 10^-14m)
EM - Typical wavelength for x-rays
10^-8 to 10^-13 (typical 10^-9m)
EM - Typical wavelength for ultraviolet light
4x10^-7 to 10^-8 (typical 10^-8m)
EM - Typical wavelength for infrared light
10^-3 to 7x10^-7 (typical 10^-5m)
EM - Typical wavelength for microwaves
10^-1 to 10^-3 (typical 10cm or 10^-2m)
EM - Typical wavelength for radiowaves
> 10^-1 (typical 10^3m)
Diffraction - Definition of diffraction
when a wave passes through an aperture and spreads out into the space beyond
Diffraction - Conditions for maximum diffraction
when the wavelength of the source is = to the aperture through which the wave is diffracting
(same magnitude ie power of ten)
Diffraction - Why is the diffraction of sound more noticeable then the diffraction of light
- sound has longer wavelengths
- aperture needs to be the same size as the wavelength of the wave
- Wavelength of sound is around 1m vs light which has one of 5x10^-7m
- Common gaps of obstacles are of the order of 1m so diffraction of sound is more commonly observed
- light requires very narrow slits to diffract
Diffraction - Describe how diffraction can be observed using a ripple tank (describe how the tank is put together)
-Plane bar of wood driven by electric motor (or use an oscillating paddle)
-wood oscillates at the frequency of the motor
-wavelength and frequency of the water waves depend on frequency of the motor
-wooden planks can be used to make obstacles and gaps to observe the diffraction of water waves
Diffraction - Explain why long wave radio waves can be detected behind a mountain but short wave radio waves cannot be
-Mountain is closer in size to the wavelength of long wave radio waves
-More diffraction takes place and radio wave is reformed closer to the mountain
-Little diffraction happens with short wave radio waves
Diffraction - Describe how you could observe diffraction in a laboratory using a loudspeaker
-Connect a signal generator to a loudspeaker in front of a slit board
-Aperture comparable to wavelength of sound generated
-Sound should spread beyond aperture which can be observed using a microphone attached to an oscilloscope
Polarisation - What is polarisation?
where the vibrations of a light wave occur in a single plane at 90º to the the direction of energy transfer
Note: light is made up of electric and magnetic fields both at 90º to the direction of energy transfer
Polarisation - Function of a polaroid or polarising filter?
polarises visible light
Polarisation -Describe what happens when when vertical polaroid is placed in front of vertically polarised light and is rotated through from 0-180º
- at 0⇒90º intensity of light gradually goes from max to 0
- 90⇒180º it goes from 0 to max
- When direction polarised light and polaroid are parallel light is let through, perpendicular non is let through
Polarisation - Describe and explain how you can find out the direction of plane polarisation of a set of microwave transmitter and receivers
- transmitter emits polarised microwaves
receiver can only detect if in same plane
orientate so they are in the same plane by turning the transmitter until max current is shown on the ammeter - place a metal grille between the transmitter and receiver
- if the grill is parallel to direction of plane polarisation of the microwaves then no current is detected as waves are absorbed by metal wires which cause electrons in the metal to vibrate
- therefore, rotate the grille until no current is detected, the direction of the wires is the direction of polarisation
Polarisation - What direction does a metal grill absorb polarised microwaves?
same plane as polarisation
Diffraction - What is a word which can be used to describe gaps for diffraction?
Aperture