Misc Controls and Displays

Question 1

True or false: The TCAS switch on the AAP controls the transponder power for normal air traffic control functions

Answer 1

True

Question 2

When the mode switch on the AAP is placed in the NORM position, what is activated?

Answer 2

UHF, VHF, VID, and TACAN systems are controlled by the MDP via the UFCP

Question 3

The channel select button on the UHF Backup Control Panel does what?

Answer 3

Toggles between preset and manual frequency selection

Question 4

In the event of MDP failure, the NAV Backup Control Panel can be used to select any ______________ frequency

Answer 4

VOR or ILS

Question 5

When the ON/OFF switch on the NAV Backup Control Panel is in the BRG position, what information is displayed?

Answer 5

Displays bearing to the selected VOR station if received

Question 6

True or false: Placing the microphone switch on the rear cockpit audio panel to the HOT position enables hot mic for that cockpit only

Answer 6

False

Question 7

True or false: Placing the TCAS SIL/ACT switch in the SIL position inhibits the aural traffic warning generated by the TCAS

Answer 7

True

Question 8

To quickly return to the primary flight reference (PFR) display on the MFD in the Front Cockpit (FCP), press the __________ on the HOTAS

Answer 8

Default Display Switch (DDS)

Question 9

True or false: Pressing the PTT in both cockpits at the same time on different radios (i.e., UHF and VHF) will result in transmissions from both pilots on the different frequencies simultaneously

Answer 9

True

Question 10

True or false: The standby instruments are provided for use as backup flight instruments if the primary flight reference system malfunctions

Answer 10

True

Question 11

With power failure, the standby attitude indicator will provide a minimum of ___ minutes of useful attitude information

Answer 11

9

Question 12

True or false: Each functional display on the EED, such as the EGT indicator is formatted to include an analog scale, moving pointer, digital readout, and color-coded range and limit markers

Answer 12

True

Question 13

If an internal failure is detected by the Master EED, EED FAIL is displayed in the EED message window and _________ is displayed in the center of the failed gage or under the failed tape

Answer 13

FAIL

Question 14

When a RPM or EGT limit is exceeded on the EED, this will be indicated by __________.

Answer 14

• The white pointer and display title turning red

- The center digital number turning red only on the EGT display

Question 15

The VDTS will record the MFD, HUD or both when the following event occurs:

Answer 15

Select the VTR page on the UFCP and toggle from STOP to FMFD, BMFD, HUD, or CMB as desired

Question 16

What is NOT a selectable VDTS recording mode?

Answer 16

Front and rear MFD combined

Question 17

The Video and Data Transfer System (VDTS), consisting of the Data Transfer Drive (DTD) and Data Transfer Cartridge (DTC), is used to upload/download mission data stored in the aircraft ________.

Answer 17

Mission Display Processor (MDP)

Question 18

When loading data to or from the MDP and DTC via the DTS menus on the MFD, a data transfer failure is indicated by?

Answer 18

A red title crossed out with a horizontal line for the applicable data item on the DTS display

Question 19

True or false: Initiation and termination of MDP data recording are normally automatic, but either crewmember can manually select this option via the MFD

Answer 19

True