ME LAWS

Question 1

An assembly of listed semi rigid or flexible tubing and fittings to carry fuel between a fuel-piping outlet and a fuel burning appliance

Answer 1

Appliance Fuel Connector

Question 2

Natural , Manufactured, Liquified, petroleum, or a mixture of these.

Answer 2

Fuel Gas

Question 3

Any installation of pipe, valves, or fittings that is used to convey fuel gas, installed on any premises or in any building

Answer 3

Gas Piping

Question 4

Any arrangement of gas piping supplied by one (1) meter, and each arrangement of gas piping serving a building, structure, or premises, whether individually metered or not

Answer 4

Gas Piping System

Question 5

Means tanks, containers, container valves, regulating equipment, meters; and/or appurtenances for the storage and supply.

Answer 5

Liquefied Petroleum Gas(LPG)

Question 6

The location of the point of delivery shall be acceptable to the serving gas supplier.

Answer 6

Provision for Location of Point of Delivery

Question 7

A hand operated device that provides a means for connecting and disconnecting an appliances or an appliance connector to a gas supply and that is equipped with an automatic means to shut off the gas supply when the device is disconnected

Answer 7

Quick Disconnect Device

Question 8

The piping and equipment between the street gas main and the gas piping system inlet that is installed by, and is under the control and maintenance of the serving gas supplier.

Answer 8

Service Piping

Question 9

Any listed or approved section or sections of pipe and fittings used to convey fuel gas and installed in a gas piping system for the purpose of providing a transition from below ground to above ground.

Answer 9

Transition Gas Riser

Question 10

A valve to be installed in a gas piping system designed to automatically shut off the gas when a seismic disturbance is detected.

Answer 10

Earthquake Actuated Gas Shut-off Valve

Question 11

A line gas pressure regulator shall be installed where the gas supply pressure is higher than the gas utilization equipment .

Answer 11

Gas pressure regulator

Question 12

shall not be slope less than 1/4 inch in 15 ft

Answer 12

gas piping slop

Question 13

the maximum demand should not exceed 250 cu.ft/hr and the maximum length between the meter and the most distant outlet does not exceed 250 ft.

Answer 13

Required Gas piping Size

Question 14

Test Gauges shall have a pressure range not more than twice the test pressure applied.

Answer 14

Inspection