Maintenance Flashcards

1
Q

What do most manufacturers sell for printers?

A

Maintenance kits.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What are five important printer maintenance factors?

A

Temperature, Humidity and Electrical Inteference (Printers are computers)
Paper Storage
Toner Storage
Dust

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What can affect the lifespan of a inkjet printer?

A

The ink used, it’s quality and the type of paper used.
Refer to the manual to figure out what is most compatible with the printer.
Vendors usually sell the precise specifications that you need.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What should you use to clean a laser printer?

A

A vacuum with a High Efficiency Particulate Air (HEPA) filtration.
It catches microscopic particles within the filters.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What should you always do before performing maintenance?

A

Consult the manual.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Why is consulting the manual particularly important for thermal printers?

A

Because they vary a lot and are very specific.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What should you do to extend the lifespan of a thermal printer?

A

To extend the life of the printer, dampen a cotton swab with isopropyl alcohol to clean the heating element. Do this on a regular basis. The heating element is located near the slot where the printed paper emerges. While the printer is open, use compressed air or a lint-free cloth to remove any debris.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What should you do about impact printer maintenance?

A

Verify if the issue if with the ribbon or the print head.
If it produces faded or light characters, the ribbon will need replacing.
If there is a consistent flaw with all characters, then the print head is stuck/broken and needs to be cleaned/replaced.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What are the three factors for maintaining a 3D printer?

A

Replace Filament.
Clean Print Bed.
Replace Hotend Nozzle.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly