Lockout Procedures

Question 1

Main electrical feed power. What are the 3 things it Feeds?

Answer 1

1 Control Electric Motors.
2 Motor Control Centre
3 Part of A Machine Production line

Question 2

Control Power
Is the supply that feeds what?

Answer 2

Control consoles
Solenoid valve
Photocells
Inputs/Outputs on the equipment

Question 3

Where can Control power be locked out at

Answer 3

the control console

Question 4

Hydraulic Loads use what done when locking out

Answer 4

Suspended Loads must be pinned in a safe position and any hydraulic pressure must be relived

Question 5

Pneumatic Air needs what done when locked out

Answer 5

Any possible remaining air pressure must be vented from the system and any suspended loads blocked to prevent movement

Question 6

The Master Control Lockout Key is installed with what?

Answer 6

A Master Control Emergency Stop Button

Question 7

Whats the purpose of The Master Control Lockout Key?

Answer 7

used for emergency shutdown of equipment in an incident, or machine malfunction.

Question 8

Hydraulic Lockouts what needs to be done the the Machine can’t be lowered

Answer 8

insert safety pins in any location with heavy suspended hydraulic loads.

Question 9

Hydraulic Lockouts what needs to be done the sliding loads driven by accumulated pressure.

Answer 9

Insert safety bars between sliding loads

Question 10

When locking out Hydraulics what Needs to be depressurized, shut off and Locked out

Answer 10

Depressurize the accumulator and System
Shut off and lock out safety valves

Question 11

In Pneumatics lockout what are some steps that can be done

Answer 11

Shut off/Lockout supply air line that feeds the pneumatic device

Depressurize air from the system, the valve may have a bleed hole

Install safety pins to support the raised load/or safety blocks