LO 1.0 - Identify a range of machinery and hand tools used in Horticulture Flashcards
What are the general safety checklist when using hand tools.
Hand and Power tools.
* Wear proper PPE, Trousers, boots, gloves.
* Tools must be in proper condition and maintenance.
* Do a quick check, air filter, oil, switches and cables. Check moving parts for wear and tear.
* Use tools properly.
* Check the area and ground for obstructions and hazards. Slips, trips and falls.
* Be weary of underground and overground electric cables, water pipes, animals.
* Be concious of other people in your vicinity.
* When finished using, tool to be cleaned and stored properly.
* Defective tools tagged and taken out of use
ID this hand tool.
Hort Mech Tool ID
Sod Lifting Shovel
* Cut a square into the turf and slide this shovel under the grass to lift the sod.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Grain Shovel
* This is a type of shovel designed specifically for moving grain and other tiny granular materials.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Core Shovel
* Used to pick up the cores from the turf after aerating.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Irish Shovel
* This is a shovel that has a sharp cutting edge designed to pierce tougher ground.
* Long handle gives extra levitation.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Border Fork
* Smaller than Digging forks
* Digging in small spaces
* Weeding in small spaces
* Digging into light, sandy soil.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Digging Fork
* Use it to break and mix the soil for better aeration and water drainage.
* For working with a large amount of hard clay soil.
* You want to break through rocks or deep root systems.
* Bigger than a Border Fork.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Manure Fork
* Used to turn over large amounts of compost and manure in order to maintain the health and fertility of compost heap.
* Used for moving large amounts of straw.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Pick Axe
* The most common use is to breakup extremely hard and dry soil.
* Use if the soil is rocky or very high clay content.
* Dragging large bulk of plant remnants or sacks or bales of hay.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Oscillating hoe
* Drive forwards and backwards with the blade digging in about 1/2 inch into the surface to clear out young weeds.
* Keep the blade sharp.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Draw hoe
* Use on harder ground.
* Used with a chopping action to loosen and break up soil.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Push hoe
* Push the hoe forward to cut weeds.
* Use your body weight to push the garden hoe, giving you greater leverage.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Springbok rake
* Scarifying lawns and removing unwanted growth.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Chelwood 32 tooth landscape rake.
* Would be used by groundsmen while preparing large flower beds and levelling extensive gravel pathways in parks and public/private gardens.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Chelwood 48 tooth landscape rake.
* Would be used by groundsmen while preparing large flower beds and levelling extensive gravel pathways in parks and public/private gardens.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Chelwood landscaper with back edge.
* With an additional back edge/blade for grading and leveling. Ideal for soil levelling and landscape work.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Bulb planter
* A tool made specifically for planting bulbs.
* Simplifies bulb planting by taking the guess work out of getting depth right.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Half moon edger
* It has a semi-circular blade. This tool is most often used for edging work. It allows for easy cutting and shaping of sod by rocking the blade back and forth.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Yard brush
* It’s ideal for sweeping paths, yards or general outdoor areas.
* Can be used for sweeping leaves, hedge clippings, sand, dirt or gravel.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Caulking gun
* The primary purpose of caulk is to create a moisture-proof seal.
* You will often find caulk used around window and door frames, where bathtubs connect to the wall.
* Use to seal any small cracks or small openings in either exterior or interior walls, flooring, or the ceiling.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Hand trowel
* A hand shovel is a small, short-handled gardening tool. They have a pointed cutting edge and tend to have a V-shaped or rounded blade to improve scooping.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Dibber
* A dibber is used when transplanting seedlings and planting bulbs.
* It is used to make a hole in the soil that you then plant your seedling or bulb into.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Claw hammer
* Claw hammers are used to pound in nails with the steel head.
* The claw on the back is used to remove nails.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Rubber mallet
* Used to level the tiles or paving slabs without damaging them by gentle application.
* Use to install edging material, garden stakes and fencing.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Sledge hammer
* Sledgehammers usually require two hands and a swinging motion involving the entire torso.
* Used in demolition work, for breaking through drywall or masonry walls.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Lump hammer
* Used by Bricklayers and masons, and other tradespeople.
* It is primarily used for hitting bolsters by bricklayers and masons to cut bricks and blocks and stone.
* The lump hammer can also be used for demolition and used to hit chisels.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Topiary shears
* This shears is designed for general pruning & training Box hedging.
* Originally used to sheer sheep, it is now a favourite choice of topiary shears for gardeners.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Loppers
* Loppers can cut anything hand pruners can, and with their long handles.
* They can let you exert enough force to cut thicker wooden branches.
* You can also work with them at a distance and for height.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Pruning saw
* A pruning saw is designed for cutting the extra large branches of trees and shrubs.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Timber hand saw
* Are a carpenters tool.
* Used to cut pieces of wood into different sizes and shapes.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Sorel roller
* Use for lawn management.
* The spiking process breaks and loosens the surface crust and reduces compaction.
* This type of aeration also allows water, nutrients and wetting agents to permeate the surface and the increased airflow into the active area which increases microbe activity and gaseous exchange.
Hort Mech Tool ID
ID this hand tool.
Hort Mech Tool ID
Lute
* Useful for spreading top dressing around a lawn.
* Can be used for leveling gravel.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Vibrating plate/ whacker
* An vibrating plate or whacker is a machine used to compact soil or other materials in agricultural settings.
* four-stroke engine.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Edger
* An edger is a gardening tool used to create neat, precise edges around beds and paths.
* Four stroke engine see below, oil reserve and dip stick
* Not pictured spark plug and spark plug, so it’s a petrol engine.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Mixer
* A Mixer is used to mix cement, sand, aggregate (course gravel), and water for making concrete.
* With oil reserve, spark plug and lead. So is a four-stroke petrol engine.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Hedge trimmer
* A hedge trimmer is a gardening tool used to cut and shape hedges.
* No fuel tank and no oil reservoir. So is a two-stroke petrol engine.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Strimmer
* A strimmer is a gardening tool used to trim grass and other vegetation in areas that are difficult to mow with a lawnmower.
* No fuel tank and no oil reservoir. So is a two-stroke petrol engine.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Consaw
* A consaw is a power tool used to cut concrete, brick, and other hard materials.
* Two stroke engine.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Reciprocating saw
* A reciprocating saw is a power tool used for cutting and demolition.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Cordless drill/driver
* A cordless drill/driver is a portable power tool used for drilling and screw driving.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Cordless impact driver
* A cordless impact driver is a power tool used to drive screws and bolts with high torque.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
110V Transformer
* A 110V transformer is an electrical device used to change the voltage of alternating current.
* 110V is safer than 220V.
Hort Mech Tool ID
ID this power tool.
Hort Mech Tool ID
Cordless angle grinder
* A cordless angle grinder is a portable power tool that uses a spinning disc or wheel to grind, cut, or sand various materials.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Wheelbarrow
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Broadcast fertiliser spreader
* With On/off lever & Cone setting
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Drop Spreader
* with Aptiture Gauge and On off lever
* Spreading fertilizer, weed killers, and ice melt chemicals without wasting much.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Sep 2 wheeled tractor
* Rotatory cultivator is attached here.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Reciprocating mower or sickle bar mower
* The conventional cutting cylinder is replaced by a cutter bar with blades.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Culti-pack seeder
* with dimpled effect roller
* Ideal for the seeding of smaller areas, the stand-on chariot is towed by a two-wheel tractor for speed and manoeuvrability.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Pedestrian stone rake
* Penetrate the soil, raking out debris, by angling the rotor either left or right, unwanted material can be removed from finished areas.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Rotovator attachment
* Tine direction is forward/backward.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Power harrow attachment
* Tine direction is rotary.
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Aerator
* Multiple solid tines are used to put a series of holes on the soils surface
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Top dresser
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Cylinder mower
* Multiple blades in a cylindrical fashion
Hort Mech Tool ID
ID this turf grass maintenance and establishment machine.
Hort Mech Tool ID
Rotary mower
* Blade rotates on this type of mower
Hort Mech Tool ID