Karen's Quiz-Falcon 900EasyLX-Part 2-Easy Design and Interface Flashcards
What does EASy stand for?
Enhance Avionics System
How many MAU’s are on board
2
Where are the MUA’s located?
MAU 1 under floor fwd of the galley
MAU 2 is in the nose cone
How many channels are in each MAU?
2
How many MRUs are on the Falcon?
2
Where are the MRUs located
MRU 1 behind the pilots seat
MRU 2 in the nose cone
How many MFBs are on the Falcon?
2
Where are they located?
On the center pedestal on the left and right of throttles
What is the function of the MKBs?
It is a single interface w alphanumeric KB &dedicated controls for flight management,TAWS, and weather radar and short cuts
What is the location of the reversion panel?
In the middle of the center pedestal behind power levers
What is the funtion of AUTO/REV?
to revert corresponding display unit when you get a red X
What does the red X mean?
You have lost the symbol generator for that screen
What is the funtion of the PDU/MDU push button
To toggle between the PDU and the MDU on the non flying pilots screen
When would you use the PDU/MDU button?
Only when in a two operating display configuration
What info is displayed on the PDU?
An ADI, HSI, ENG-CAS page w engine parameterinf and CAS messages area and a 1/6 window that can be filled with info i.e. ENG-TRM-BRK/RADIOS, SENSORS and other good stuff
