IED practice questions Flashcards
What is the name of these arrows?
UCS
d2*.5 is considered what type of constraint?
Parametric
What type of dimensioning technique is pictured on this view?
Baseline/Datum
What part would require a section view for manufacture?
Tan; the bottom left
All of the icons pictured represent ____ constraints and can be used to define the shape and size of sketched geometry in a CAD system.
geometric
The image pictured is best described as a _____?
form
The organization that sets the standards for drawing symbols, line conventions, and dimensioning practices is known as?
ANSI
What is the name of the item pictured to the right that is commonly found on a drawing sheet?
Parts list
Which is the first view placed or created in a three-view drawing or sketch?
front
The basic dimension on a detail drawing that indicates the distance from front to back.
Depth
An improvement of an existing technological product, system, or method is referred to as a(n)?
innovention
This image is called a _______?
Working Drawing
The most common view used in three-view, orthographic drawings are
Top
Front
Right
What type of dimensioning technique is pictured on this view?
Chain/Series
What type of dimensioning technique is pictured on this view?
Baseline/Datum
To align the center of the cylinder with the center of the hole AND its edge, what type of constraint should be used?
insert
What method did the designer use to create this part?
additive
What is the name of the item pictured that is commonly found on a drawing sheet?
This image is called a _______?
Working Drawing
What type of pictorial drawing is pictured here?
Oblique
