Hydraulic and pneumatic power systems

Question 1

*What materials form the base of the three types of hydraulic fluids?

Answer 1

Vegetable, Mineral, and phosphate-esters

Question 2

*what color denote mineral base and phosphate ester base hydraulic fluids?

Answer 2

Mineral base fluids are Red, and phosphate ester based fluids are light purple

Question 3

What are the results of exposing lacquers, oil based paint, plastic resins, and vinyl compounds to phosphate-ester based hydraulic fluid?

Answer 3

The materials will be damaged and/ or softened or the paint will peel

Question 4

Name several sources used to develop hydraulic pressure

Answer 4

Hand pump, engine-driven pump, and electrically driven pumps

Question 5

What would cause the bypass valve in a hydraulic filter to open and allow unfiltered fluid to circulate in the system?

Answer 5

A clogged filter element

Question 6

Describe several methods of pressurizing a hydraulic reservoir?

Answer 6

Engine bleed air, system pressure acting on a small piston in the reservoir, using variable-displacement hydraulic pumps

Question 7

What feature prevents engine damage if an engine-driven hydraulic pump seize or is overloaded?

Answer 7

A shear section in the pump driveshaft will break, disconnecting the pump from the engine

Question 8

Describe the purpose of a pressure relief valve?

Answer 8

pressure relief valves limit the maximum pressure produced by the pump, thereby preventing failure of the system components.

Question 9

Engine driven pump deliver the output fluid flow in what two forms?

Answer 9

As a constant volume or a variable volume

Question 10

Describe the operation of a gear type pump?

Answer 10

Two meshed gears, driven by a power source, rotate in a housing. inlet fluid is carried around the outside of the gears and delivered to the outlet side as the gear rotate

Question 11

Describe the purpose of a pressure regulator?

Answer 11

Pressure regulator manage the output of the pump to maintain system pressure. they allow the pump to be unloaded so it turns without significant resistance

Question 12

What is the device that is used in some systems to supplement the pump output during periods of high demand?

Answer 12

An accumulator

Question 13

What are the three different types of accumulators?

Answer 13

Piston, diaphragm, and bladder

Question 14

What safety precautions must be taken prior to dissembling an accumulator?

Answer 14

Release all of the air or preload

Question 15

When a hydraulic unit is replaced, what precautions should be taken to avoid contamination the system?

Answer 15

all line should be capped or plugged immediately after they are disconected

Question 16

What types of components or systems are pneumatically operated in some aircraft?

Answer 16

Landing gear, brakes flaps, and other mechanical actuator

Question 17

Name several sources of pneumatic power

Answer 17

Storage bottle, engine bleed air, engine driven compressors or vane-type pumps

Question 18

What happens to excess pressure in pneumatic system?

Answer 18

A relief valve vents it overboard

Question 19

What is the function of a restrictor in a pneumatic system?

Answer 19

to control the rate of flow of the airflow

Question 20

What are the reason for periodically purging a pneumatic system?

Answer 20

To remove moisture and contaminants