***Hoist Procedures***

Question 1

When should the power available check be accomplished?

Answer 1

Prior to hoist operations

Question 2

Where is the hoist power switch located?

Answer 2

On the left side of the overhead console panel

Question 3

Where are the hoist circuit breakers located?

Answer 3

On the overhead circuit breaker panel

Question 4

How many hoist cable cut switches are there and where are they located?

Answer 4

There are two:

1. The pilot’s is on the center pedestal
2. Hoist operator’s is mounted on the back of the rescue hoist control panel

Question 5

What is the usable length of the hoist cable?

Answer 5

250 feet

Question 6

What is the maximum operating load for the hoist?

Answer 6

600 lbs

Question 7

T/F - When pulling the survivor into the helicopter, the easiest method is to turn the survivor’s back to the helicopter and pull in.

Answer 7

True

Question 8

What should you do if the hoist OVERTEMP light comes on during hoist operations?

Answer 8

Terminate hoist operations as soon as possible, allowing the hoist to cool until the OVERTEMP light extinguishes

Question 9

What is the maximum allowable load on the hoist when the speed mode switch is in the HIGH position?

Answer 9

300 lbs