HAZMAT Brush up Flashcards
A tank carrier designed to haul various chemicals whose pressures do not exceed 40psi would be an: A - MC 306 B - MC 307 C - MC 312 D - MC 331
B - MC 307
You arrive on the scene of a vehicle accident involving a cargo tank truck carrying gasoline. The truck is leaking its product into a small lake. The driver of the truck gives you an MSDS sheet on gasoline, which gives a specific gravity of 0.8. With this information you can predict that the product will:
A - remain on top of the water, as it is lighter than the water.
B - sink to the bottom, as it is heavier than water.
C - completely mix with the water and no longer be a hazard.
D - react violently upon contact with the water.
A - remain on top of the water, as it is lighter than the water.
Which of the following is not an example of a pressurized facility tank? A - High pressure horizontal tank B - High pressure spherical tank C - Cryogenic liquid tank D - Underground storage tank
B - underground storage tank
Emergency centers, such as \_\_\_\_\_\_\_ are principal agencies providing immediate technical assistance to an emergency responder. A - OSHA B - NFPA C - CHEMCO D - CHEMTREC
D - CHEMTREC
Which of the following exposure values could be repeated a maximum of four times daily for 15 min with a 60 min rest period between exposures? A - IDLH B - TLV-TWA C - TLV-STEL D - TLV-C
C - TLV-STEL
CHEMTREC/CANUTEC can usually provide all of the following information, except. A - hazard information warnings B - databases C - technical information D - advice on remediation contractors
D - advice on remediation contractors
A reaction that is associated with over-pressurization of closed containers and occurs at a rate of one second or less is called a: A - rapid relief B - violent rupture C - detonation D - spill
B - violent rupture
Which of the following would be classified as a chemical asphyxiant? A - carbon dioxide B - Nitrogen C - Carbon monoxide D - Methane
C - Carbon monoxide
Which of the following is not a dispersion pattern created by the release of a HM? A - Cloud B - Plume C - Cone D - Puddle
D - Puddle
Which DOT hazard class covers nerve agents used in chemical warfare? A - DOT 6.3 B - DOT 6.1 C - DOT 6.2 D - DOT 5.2
B - DOT 6.1
The immediate concern when dealing with combustible liquid spills is to:
A - apply AFFF foam to the combustible liquid
B - prevent ignition of the fuel
C - dike storm drains along the collection route
D - ignite fuel to allow the combustible materials to burn off.
B - prevent ignition of the fuel
The measurement commonly used by OSHA in evaluating workplace exposure during an 8-hour period is: A - PEL B - LC C - TLV-C D - STEL
A - PEL
Read the following statements regarding vapor dispersion, then answer below.
1) Vapor dispersion involves using water spray or fans to intentionally move vapors away from certain areas.
2) Vapor dispersion is always a good idea when flammable substances are the problem.
3) Vapor dispersion is only effective with materials that are water soluble.
A - All three statements are correct.
B - Only statement 1 is correct
C - Only statements 1 and 2 are correct
D - Only statements 1 and 3 are correct
B - Only statement 1 is correct
Which of the following is a type of drum? A - Vesicants B - Wood Barrels C - Open heads D - Bulk Containers
C - Open heads
Which of the following tasks at a HMs incident is/are provided by Logistics?
A - Providing information to the media
B - Coordinating interaction between law enforcement personnel and emergency response operations.
C - Monitoring the incident and personnel and ensuring compliance with safety procedures.
D - Securing facilities, services, and equipment.
D - Securing facilities, services, and equipment.
At a HMs incident, the assistant safety officer reports to the: A - incident commander B - safety officer C - dispatcher D - HMs team leaders
D - HMs team leaders
"Work uniforms that provide minimal protection," best defines EPA Level \_\_\_\_\_\_\_ protection. A - A B - B C - C D - D
D - D
This suit is used where splashes may occur, but where respiratory hazards are minimal. A - A B - B C - C D - D
C - C
Proximity gear allows the wearer in close proximity to a burning liquid - it offers protection for temperatures up to: A - 100 to 200 degrees B - 300 to 400 degrees C - 500 to 750 degrees D - 900 to 1000 degrees
B - 300 to 400 degrees
\_\_\_\_\_\_\_ is usually based upon standardized laboratory tests that may incorporate a very large safety factor. A - Degradation B - Penetration C - Permeation D - Both B and C are correct
D - Both B and C are correct