GTM Start Sequence

Question 1

What is the first stage?

Answer 1

7 permissive's 
  Most remote bearing >14.5psig
  NGG <3500rpm
  Turning gear disengaged
  UEC + reset
  Throttle at idle
  Motor regulating valve in start position and not used by another engine
  Clutch cover on place

Question 2

What is the second stage?

Answer 2

5sec

Motor air regulator and bleed air shift

Question 3

What is the third stage?

Answer 3

20 sec timer
  NGG must reach >or equal to 1200rpm
  1200rpm
     Igniters on
     Fuel valves open
     40sec timer
        T5.4 must reach 400 degrees

Question 4

What is the fourth stage?

Answer 4

45 sec timer

GTM L/O pressure > or equal to 10psi

Question 5

What is the fifth stage?

Answer 5

90sec timer 
  NGG >or equal to 4000 +or - 200rpm
    Igniters off
    Start air valve closed
    Bleed air back to masker air
    Low L/O Alarm and auto shutdown enable

Question 6

What is the sixth stage?

Answer 6

NGG =5000 +or- 100rpm
Idle speed
Vent dampener open and cooling fan on
Icing alarm enabled