General Maintenance Test Questions Flashcards
memorize completely
Which squadrons and functions form Maintenance group (MXG)?
Maintenance operations squadron (MOS), Maintenance squadron(s) (MXS), Aircraft maintenance squadron(s) (AMXS). Quality assurance (QA)
Who monitors flying and maintenance schedules, and maintains visibility of fleet health indicators?
Maintenance operation center (MOC)
How many months must you have in the Air Force before you may attend the Airman Leadership School (ALS)?
48
Air Force occupational safety and health (AFOSH) standards are located within what Air Force publication series?
91
Which Air Force instruction defines quality maintenance and requires maintenance personnel to display integrity and comply with all written guidance?
21-101
During flight line and test cell operations you may be exposed to?
(CO) carbon monoxide
Toxic materials are easiest to get into the body and cause rapid toxic reactions when they are in the form of?
gases
What would you use to clean and sanitize respirators?
mild soap
Items that are awaiting parts or maintenance are each required to have an attached department of defense (DD) form?
1575
Which Item is one that a storage time period must be assigned to ensure that it will perform satisfactorily over a specified period of time?
Shelf-life
What type of Items must be reflected on the custodian authorization/custody receipt listing (CA/AL)?
Equipment authorization inventory data
What system has the purpose of establishing firm control over repair cycle assets to make sure they are repaired at base level, or sent to repair facility as fast as possible?
Repair cycle support system
Which supplied document provides the means for organizations to review all document numbers processed during the day by the standard base supply system (SBSS)?
Daily Document Register (D04)
Base supply must deliver numerous parts to numerous organizations on a prioritized basis because of the differences in each organization’s?
mission
Which publication provides a block-by-block explanation of how to document the Air Force Technical Order (AFTO) Form 350 tag?
TO 00-20-2
If you need detailed information concerning codes and entries on the Air Force Information Management Tool (IMT) Form 2005, Issue/Turn-In Request, refer to Air Force Manual (AFMAN)?
23-110
The first section of a technical order (TO) number identifies the ?
Category and the aircraft mission type in the TO
What are the two classifications of failures in the reliability centered maintenance (RCM) approach?
Potential and funcional
Which program integrates hardware, software, maintenance, and diagnostic processes to quantify and monitor/manage engine health?
Engine trending and diagnostics (ET&D)
A primary objective of the engine reporting system is to:
Maintain accurate and timely engine inventories.
What is the purpose of the Lead/Pacer programs?
Determine distress mode of an engine and its subsystems in the field
What should you use to hold your tools when you cannot locate your toolbox within arm’s reach?
Toolbag
The vernier scale on a micrometer is used to read measurements in?
ten thousanths of an inch.
What feature is common to all dial indicators?
Ability to amplify movement greatly
What should you use for cleaning measurement tools?
Dry cleaning solvent.
If the input to the fluke 8025A meter is over the range being used, what will the digital display show?
OL
What are the type(s) of views available with a rigid borescope?
Direct and lateral
Which part of borescope misuse causes a poor field of view (black spots)?
Application of lateral (pinching) pressure to the fiber bundle
What type of pin is used in joints that carry sheer loads and where the absence of clearance is essential/
Tapered
You can identify the various system lines used to transfer fluids and gases on jet engines by?
The color-code bands places around the tubing or hoses
What numerical value is given to a fitting use on a tubing that measures 3/8ths inch?
- (if the denominator is 16, the numerator for 3/8ths is 6)
When you receive an engine in your shop, you should check for the applicable forms and then?
Check the compressor inlet for FOD
When disassembling the oil filter, why should you always use a clean container?
To prevent false contaminant indications
To release the internal air pressure in a shipping container/module, you must remove the?
Filter valve on the front end of the container
Prior to removing a shipping lid container, what warning must be observed?
Release all pressure before removing lid
How many pins secure the adapters to the shipping container support?
4
To prepare the engine fuel system for service after depreservation, you must flush the system with?
fuel
When can you consider a depreserved engine ready for service?
Only after a ground check run of the engine has been performed
When metal is attacked by chemical corrosion, it will start?
On the surface of the metal
On the personnel maintenance platforms, the purpose of the platform safety lockpins is to?
Prevent the platform from lowering while it is in use
When a bench stock item has a type 1 shelf-life, it means the item?
Has a definite nonextendable period of shelf-life
