Tools and Aircraft Hardware Flashcards
Which TO covers Calibration procedures for torque wrenches?
33K6 series
You should wear eye protection when you work?
With tool that may cause flying particles
If you must torque a sequence of three or more bolts?
Use a staggered sequence
If you tasked to measure the clearance between two surfaces, what type of gauge would you use?
Thickness gauge
The longest calibration movement between the spindle and anvil of an out side micrometer is?
I inch
How many range settings can be used when measuring voltage with a fluke 8025A?
4
What is the maximum voltage that can be measured if the range button is set at 30 on the fluke 8025A multimeter?
32
When operating a borescope, what part of the borescope illuminates the interior or the area you are inspecting?
Distal tip light guides
What type of bolt should be used where shearing stress occurs?
Clevis
Do not use self-locking nuts on?
Engine joints
Which nuts should never be used in areas where temperature exceeds 250 degrees F
Nonmetallic self-locking nuts
Cotter pins are used for safetying various units such as
Castellated nuts
When lock wiring, how many twists per inch are required to produce the proper stiffness?
8 to10
