Fusion 360 Flashcards
CAM
Computer Aided Manufacturing
CNC
Computer Numerical Control
lay out a framework for a model from which you can build on and modify later down the line
Sketch
essential building blocks of most designs
Lines
allows you to input your measurements in either metric or imperial or toggle between the two by specifying your units
Dimension
allows you to project geometry from outside the active sketch onto the sketch plane so that you can reference surrounding features in a design as you define a sketch
Project command
add depth to open or closed sketch profiles or faces in Fusion 360
Extrude
add to an existing geometry
Join
remove an area from an existing body
Cut
create a body at the intersection of an existing body and the new body
Intersect
add a hole to a solid body
Hole
round the edges of a solid body by removing material from exterior edges or by adding material to interior edges
fillet
creates a construction plane at a specified distance from an existing face or plane to allow you to sketch on a plane that you define
Offset Plane
lets you position components relative to one another, then define the relative motion between them. Use this command when the components are not yet positioned relative to each other in an assembly.
Joint
lets you define the relative motion between components in Fusion 360. Use this command when the components are already positioned relative to each other in an assembly.
As-Built Joint