FPDFD Flashcards
How is high-availability supported for Cisco Meraki devices?
A.
Only the MX Security Appliances that use VRRP support high availability.
B.
An active/active high-availability pair is recommended for MX Security Appliances.
C.
The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
D.
The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
Correct Answer: A
What are the Loss and Average Latency statistics based on?
A.
responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
B.
responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
C.
responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
D.
responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
Correct Answer: B
Which Cisco Meraki best practice method preserves complete historical network event logs?
A.
Configuring Dashboard logging to preserve only certain event types.
B.
Configuring the preserved event number to maximize logging.
C.
Configuring a syslog server for the network.
D.
Configuring the preserved event period to unlimited.
Correct Answer: C
** Corrected **
Which design requirement is met by implementing syslog versus SNMP?
A.
when automation capabilities are needed
B.
when proactive alerts for critical events must be generated
C.
when organization-wide information must be collected
D.
when information such as flows and client connectivity must be gathered
Correct Answer: D
What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?
A.
manual
B.
DEP
C.
Sentry enrollment
D.
Apple Configurator
Correct Answer: B
** Corrected **
Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?
A.
starts on the primary MX appliance and then occurs on the secondary MX appliance
B.
starts on the secondary MX appliance and then occurs on the primary MX appliance
C.
starts on both MX appliances at the same time and then immediately reboots both appliances
D.
starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases
Correct Answer: A
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Switch Mgmt IP
Switch name
Port Name
interface type
STP bridge property
CLONED:
Switch Mgmt IP
interface type
STP bridge property
Not CLONED:
Switch name
Port Name
A new application needs to be pushed to all iOS devices. Some devices report “NotNow” in the event log and do not install the application.
What does the “NotNow” event indicate?
A.
The device is locked with a passcode.
B.
The device cannot connect to Cisco Meraki servers.
C.
The application requires the most recent iOS version.
D.
The device cannot connect to Apple servers.
Correct Answer: A
Which requirement is needed to implement Fast Lane on Cisco Meraki APs?
A.
wireless profile installed on an Apple iOS device
B.
wireless profile installed on a Cisco iOS access point
C.
adaptive 802.11r disabled
D.
traffic shaping rule tagging traffic with a DSCP value of 46 to Apple.com
Correct Answer: A
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
A.
For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
B.
Peers contact the VPN registry at UDP port 9350.
C.
For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
D.
Peers contact the VPN registry at TCP port 9350.
E.
For IPsec tunneling, peers use UDP ports 500 and 4500.
Correct Answer: B,C
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
enroll
create profile
add settings profile
define tags
apply profile
Correct Order
create profile
add settings profile
enroll
define tags
apply profile
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
A.
highest VLAN ID that is configured and set to NO to use VPN
B.
lowest VLAN ID that is configured and set to YES to use VPN
C.
highest VLAN ID that is configured and set to YES to use VPN
D.
lowest VLAN ID configured and set to NO to use VPN
Correct Answer: C
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
A.
New clients can connect.
B.
New clients cannot connect.
C.
Currently associated clients stay connected.
D.
Currently associated clients are disconnected.
E.
Currently associated clients are affected by restrictive traffic shaping rules.
Correct Answer: B,D
Which information do the MXs in a High Availability pair share?
A.
stateful firewall database
B.
DHCP association database
C.
spanning-tree state
D.
time synchronization state
C.
spanning-tree state
