FO engine start tasks Flashcards
1
Q
FO engine start tasks
A
APU Manifest Takeoff data trims seat belts and shoulder harnesses
2
Q
APU
A
turn on apu start ac power transfer bleeds transfer to apu packs on
3
Q
Manifest
A
CLR and pin
complete manifest in acars or manually
4
Q
Takeoff data
A
set t/o data:
Enter v speeds
set speed bug to v2+20
Verify N1 thrust settings
5
Q
trims
A
set stab trim for t/o setting
center aileron and rudder trim
state trim setting
6
Q
seat belts and harnesses
A
check seat belts and harnesses are secure
rudder pedals and seats are properly adjusted
jumpseat as well when occupied
7
Q
FO callouts for engine start
A
PACKS OFF STARTING ENGINE 1/2 L/R select start start timer check ed2 engine start advisory message Ignition advisory message N2 less than or equal 20% ITT less than 120C
Bring thrust to idle
Check: Fuel flow N1 rotation ITT increasing Oil pressure increasing ED2 L or R eng start start status message extinguished at 55% N2 Ignition message extinguished engine parameters stabilize ENGINE (\_\_) START COMPLETE
8
Q
FFOD FUEL FEED CHECK VALVE TEST
A
After left engine start L and R boost pumps deselect check: ED1 R FUEL LO PRESS caution message L and R boost pumps on check: ED1 R FUEL LO PRESS caution message extinguished ED2 fuel pumps on advisory messages
