Flt Management System

Question 1

How can the center CDU be used to control the left ND map?

Answer 1

The center CDU is automatically selected after the left CDU fails.

Question 2

LNAV, if armed, activates if the aircraft is above 50 feet and within ____ of the active route leg.

Answer 2

2.5 miles

Question 3

Of the three CDUs, the center CDU is the backup for the other two CDUs.

Answer 3

True

Question 4

If the FMC Selector is in AUTO and the primary FMC fails, what happens automatically?

Answer 4

The other FMC takes over.

Question 5

The only indications of single FMC failure with the FMC Selector in AUTO are an EICAS advisory and/or a CDU scratchpad message.

Answer 5

True

Question 6

With a dual FMC failure and given the following display on the PFD, select the most appropriate initial action.

Amber line thru LNAV and VNAV PTH

Answer 6

Select different autopilot roll and pitch modes.

Question 7

With a dual FMC failure and a PFD as shown, select the most correct action.

SPD. HDG HOLD. ALT

Answer 7

LNAV can be re-engaged.

Question 8

With an AIR DATA SYS Caution annunciation, how will the PFCs be affected?

Answer 8

PFC’’s go to Secondary mode.

Question 9

With PFC’s in the Secondary mode, what might be your first indication(s)?

Answer 9

Loss of autopilot.